Difference between Plague Bearer r3 and r4

Gear, Suggestions and Discussion.

Moderators: Kent, computer controlled, flight

Post Reply
User avatar
mmelnick
No melody, no harmony
Posts: 1039
Joined: Fri Oct 02, 2009 12:22 pm
Location: Springfield Gardens NYC

Difference between Plague Bearer r3 and r4

Post by mmelnick » Thu May 16, 2013 4:41 pm

What's the difference between the Plague Bearer r3 and r4?
matthewmelnick.com
metrono.me
bloodofazombie.com
darksidenyc.com
myworld.ebay.com/brooklyn_collectables

User avatar
sonicwarrior
Super Deluxe Wiggler
Posts: 3815
Joined: Tue Sep 29, 2009 3:36 pm
Location: Cologne, Germany

Re: Difference between Plague Bearer r3 and r4

Post by sonicwarrior » Fri May 17, 2013 9:54 am

From http://www.flightofharmony.com/?page_id=22
Changes in Revision 4

Most changes in the r4 were for ease of assembly purposes, but two new features were added:
Input Attenuator: Earlier versions often required use of an external VCA to reduce input signal levels and prevent overdriving the input. This is now handled by the input attenuator.
Output limiting: The output levels of earlier versions could spike well beyond ±5Vp-p, so an output limiter was added. The limiter has a soft to medium curve and can be disabled by moving the two jumpers as shown on the PCB.
Other changes:
- Knob placement
- Gain jack multipled
- Jack placement
Soundcloud
For sale: Jürgen Haible Tau Phaser (MOTM format)

User avatar
mmelnick
No melody, no harmony
Posts: 1039
Joined: Fri Oct 02, 2009 12:22 pm
Location: Springfield Gardens NYC

Post by mmelnick » Tue May 28, 2013 3:45 pm

Thanks
matthewmelnick.com
metrono.me
bloodofazombie.com
darksidenyc.com
myworld.ebay.com/brooklyn_collectables

Post Reply

Return to “Flight of Harmony”