Hard Case for 2-Frame - suggestions?

Modular and other sound devices from BugBrand.

Moderators: Kent, BugBrand

Post Reply
/\/\/\/
Common Wiggler
Posts: 143
Joined: Tue Oct 14, 2014 7:30 pm

Hard Case for 2-Frame - suggestions?

Post by /\/\/\/ » Fri Aug 17, 2018 10:11 am

Anyone have a good solution for Bugs on the go? My current method is wrapping the 2-Frame in a bath towel for extra cushion (and to round out the sharp corners of the case) and then putting it in a large backpack. This works fine although I would like something that provides a bit of protection for the pots, or for longer journeys.

Pelican case seems good:
https://www.pelicancases.com/Pelican-1490-P120.aspx

Maybe someone has found a better/cheaper solution?

User avatar
chrisdermo
Ultra Wiggler
Posts: 974
Joined: Sun May 20, 2012 1:52 pm

Post by chrisdermo » Fri Aug 17, 2018 10:30 am

I used (and still use) this for a two framer when i take it out and about:




was a £30 jobby from maplin in the uk. Granted I had to remove most of the padding inside but the knob face is protected by foam and i wedge foam around all the edges for cushioning. I'm not throwing it around so it's been fine for me.

Maplin were a rubbish company though, good riddance.
WTB / WTTF: Bugbrand PRC2B, DD3, PRC4, ENV1

Current Bugs frame:
https://www.modulargrid.net/f/racks/view/580413

User avatar
indexofmetals
Super Deluxe Wiggler
Posts: 1551
Joined: Tue Sep 23, 2008 6:49 am
Location: Isle of Man

Post by indexofmetals » Fri Aug 17, 2018 11:08 am

I have a pelican case which I used for my two frames and it's been worth the extra price.

emenel
Learning to Wiggle
Posts: 46
Joined: Sat Dec 24, 2016 4:30 pm
Location: Toronto

Post by emenel » Fri Aug 17, 2018 12:28 pm

indexofmetals wrote:I have a pelican case which I used for my two frames and it's been worth the extra price.
Which size case fits two frames nicely? and is there space for power, cables, etc?

User avatar
indexofmetals
Super Deluxe Wiggler
Posts: 1551
Joined: Tue Sep 23, 2008 6:49 am
Location: Isle of Man

Post by indexofmetals » Fri Aug 17, 2018 1:57 pm

my case for the bug frames is back in the UK but i've got the peli air 1555 for some smaller custom boxes that fit two frames worth and it's just about the same size but a bit lighter.

/\/\/\/
Common Wiggler
Posts: 143
Joined: Tue Oct 14, 2014 7:30 pm

Post by /\/\/\/ » Fri Aug 17, 2018 3:38 pm

Thanks for the input. Chris's case looks pretty adequate to me.

For whatever reason, I clicked the Pelican Air promo vid and it made me smile to think of all the various military / extreme outdoors / industrial people carrying Pelican cases with SynthVoices inside. They do look top quality though. May try to find a used one.

User avatar
otoskope
Super Deluxe Wiggler
Posts: 1199
Joined: Sun Apr 03, 2011 7:04 am
Location: Island X, West Coast of Sweden

Post by otoskope » Sat Aug 18, 2018 7:34 am

I have a DJ backpack which fits my 2x16FW system nicely (or 2x11FW + some other machines), with generous padding and room for plenty of extras (laptop, PSU, cables). It's one of the Magma backpacks, a taller version. Lot's of good cases in the DJ world, that fits desktop modulars.

For 2x11FW shallows, I have also used a padded suitcase, very similar to Chris' thing. Those can often be found cheaply in hardware stores.

When travelling far, I have sometimes stuffed a bug system in my check-in suitcase, with masonite baords on both sides (and strings around to keep in place) to protect panel&pots, and plenty of clothes etc around for padding.
The brain is always greener on the other side.


soundcloud1 soundcloud2
bandcamp
youtube

syncretism
Morbidly self-aware and liking it
Posts: 1494
Joined: Sun Jan 25, 2009 7:05 pm
Contact:

Re: Hard Case for 2-Frame - suggestions?

Post by syncretism » Tue Jan 14, 2020 10:38 am

Do you reckon the 1556 Air might be too snug for a pair of double frames with power and cables?

https://www.pelican.com/us/en/product/cases/air/1556

Ack, I'll probably have a couple small 5fw things, too, like the DRM1. Suddenly the 1615 doesn't seem so crazy.

User avatar
BananaPlug
Super Deluxe Wiggler
Posts: 2643
Joined: Wed Dec 05, 2007 10:37 pm
Location: PHL USA

Re: Hard Case for 2-Frame - suggestions?

Post by BananaPlug » Sat Jan 18, 2020 1:43 pm

I'm using an SKB case.
Outside: 22" x 18.5" x 8.5"
Inside: 20.5" x 15.5" x 7.44"
I just turn the frac 90 degrees, leaving things patched, lower that and the euro into the box and pack odds and ends around them. A thin piece of plywood on top for more accessories and cables. That and a powered speaker is the whole setup. Hand carried of course.

EDIT: (Aug 2020) Same box but gear's been rebuilt into a homemade 3 row, 21" wide frame. It ends up holding more and being less of a bother then the old pix below. Proving that sometimes after many incremental changes it may be time to step back and try a fresh approach.
Attachments
1.jpg
1.jpg (33.9 KiB) Viewed 271 times
2.jpg
2.jpg (36.6 KiB) Viewed 271 times
3.jpg
3.jpg (36.56 KiB) Viewed 271 times
Last edited by BananaPlug on Thu Aug 13, 2020 2:51 pm, edited 1 time in total.
(Sounds)--> :eek:
Misconstrued comments taken out of context may offend some readers

syncretism
Morbidly self-aware and liking it
Posts: 1494
Joined: Sun Jan 25, 2009 7:05 pm
Contact:

Re: Hard Case for 2-Frame - suggestions?

Post by syncretism » Mon Jan 20, 2020 11:18 am

I found a Nanuk 960 with foam for like half-price, and I couldn't pass it up. With hope, this will provide a defacto limit to my BugBrand addiction, but I don't know... :bugbrand: :bugbrand: :bugbrand:
case.jpg
case.jpg (1.56 MiB) Viewed 245 times

sungja
Wiggling with Experience
Posts: 422
Joined: Fri Jun 06, 2008 9:44 am

Re: Hard Case for 2-Frame - suggestions?

Post by sungja » Mon Jan 20, 2020 6:50 pm

Not a hardcase but the gator gk 2110 bag is perfect for a 2 frame shallow bug setup.

User avatar
BugBrand
Knowledge of Bugs
Posts: 7373
Joined: Tue Jul 15, 2008 11:59 am

Re: Hard Case for 2-Frame - suggestions?

Post by BugBrand » Tue Jan 21, 2020 4:55 am

sungja wrote:
Mon Jan 20, 2020 6:50 pm
Not a hardcase but the gator gk 2110 bag is perfect for a 2 frame shallow bug setup.
That's great to know!

northerntao
Common Wiggler
Posts: 88
Joined: Sun May 31, 2015 9:12 pm
Location: Anchorage

Re: Hard Case for 2-Frame - suggestions?

Post by northerntao » Tue Aug 11, 2020 2:29 pm

sungja wrote:
Mon Jan 20, 2020 6:50 pm
Not a hardcase but the gator gk 2110 bag is perfect for a 2 frame shallow bug setup.
Glad I found this thread. I went to source a 2110 for my new 2 frame and found I had bought one from Amazon back in 2015 for something. Now to dig through the closet

I’m thinking about ordering a custom cover from these guys. I have a few of their covers and they are affordable and a step up from a towel or trash bag. I’ve learned the hard way that nothing is immune from spilled coffee or cat puke - the latter was the fate of a cheap Behringer mixer so it was a cheap lesson!

https://www.digitaldeckcovers.com/

User avatar
hollunderkurve
Common Wiggler
Posts: 98
Joined: Mon Nov 18, 2019 8:10 pm
Location: NY Woods
Contact:

Re: Hard Case for 2-Frame - suggestions?

Post by hollunderkurve » Wed Aug 12, 2020 10:14 am

BugBrand wrote:
Tue Jan 21, 2020 4:55 am
sungja wrote:
Mon Jan 20, 2020 6:50 pm
Not a hardcase but the gator gk 2110 bag is perfect for a 2 frame shallow bug setup.
That's great to know!
agreed! definitely planning to get one of these (though still might use the towel-wrapping method for a bit of extra cush...) :hihi:

Post Reply

Return to “BugBrand Devices”