Cheekies

Modular and other sound devices from BugBrand.

Moderators: Kent, BugBrand

User avatar
BugBrand
Knowledge of Bugs
Posts: 7406
Joined: Tue Jul 15, 2008 11:59 am

Re: Cheekies

Post by BugBrand » Fri Feb 21, 2020 5:18 am

Two blue DRM1s?! My memory has clearly faded more than I, umm, remember!

User avatar
chrisdermo
Ultra Wiggler
Posts: 986
Joined: Sun May 20, 2012 1:52 pm

Re: Cheekies

Post by chrisdermo » Fri Feb 21, 2020 6:20 am

:hihi: Daren must've snuck a second out of you while you preoccupied with something else back in the day
WTB / WTTF: Bugbrand PRC2B, DD3, PRC4, ENV1

Current Bugs frame:
https://www.modulargrid.net/f/racks/view/580413

User avatar
cygmu
Super Deluxe Wiggler
Posts: 1553
Joined: Mon Feb 15, 2016 3:33 pm
Location: UK

Re: Cheekies

Post by cygmu » Fri Feb 21, 2020 5:15 pm

Funny story, sort of. I designed myself some cheeks to mount a few Serge boats and located a laser cutting shop near me: Bristol design forge. Got the cheeks made and went to collect them today.

First thing the chap said was “I suppose you know Tom Bugs...”

User avatar
BugBrand
Knowledge of Bugs
Posts: 7406
Joined: Tue Jul 15, 2008 11:59 am

Re: Cheekies

Post by BugBrand » Fri Feb 21, 2020 7:45 pm

Haha - Brilliant!

User avatar
batchas
Super Deluxe Wiggler
Posts: 4758
Joined: Wed Nov 09, 2011 2:51 pm

Re: Cheekies

Post by batchas » Sat Feb 22, 2020 1:52 am

cygmu wrote:
Fri Feb 21, 2020 5:15 pm
First thing the chap said was “I suppose you know Tom Bugs...”
:bugbrand:
-----------------------------------
Batchas website
Bandcamp page

rpc
Common Wiggler
Posts: 146
Joined: Wed Feb 08, 2012 8:59 pm
Location: Toronto, Canada

Re: Cheekies

Post by rpc » Mon Feb 24, 2020 8:47 pm

lud wrote:
Thu Feb 20, 2020 3:56 pm
IMG_20200220_205059-01.jpeg
Beautiful! What a system. That’s very helpful. Thanks for sharing.

User avatar
batchas
Super Deluxe Wiggler
Posts: 4758
Joined: Wed Nov 09, 2011 2:51 pm

Re: Cheekies

Post by batchas » Wed Feb 26, 2020 8:40 am

I ordered this morning metal cheeks from a layout I adapted a bit for 6 frames and realized 10 mins ago that I have deep frames :doh: :doh: :doh:
I just called the fabric to cancel. They were not very happy (first time I had to do with them).
I need actually to re-think the all thing (bottom, depth, 3rd hole placement etc).
-----------------------------------
Batchas website
Bandcamp page

User avatar
batchas
Super Deluxe Wiggler
Posts: 4758
Joined: Wed Nov 09, 2011 2:51 pm

Re: Cheekies

Post by batchas » Sun Mar 01, 2020 8:51 am

batchas wrote:
Wed Feb 26, 2020 8:40 am
I need actually to re-think the all thing (bottom, depth, 3rd hole placement etc).
So I made all corrections for the cheeks holding the deep frames and I should be able to order soon. Maybe next week.
Once they are made and I know concretely if everything's ok, then I'll share here the files.
I'm making 6 frames cheeks for my old blue system, but I'll do also a layout to share for 5 if needed.
Image

The cheeks are actually a bit higher now than in the 3D preview, so the power cable fits well.
Image
-----------------------------------
Batchas website
Bandcamp page

User avatar
deltaphoenix
Super Deluxe Wiggler
Posts: 1373
Joined: Sun Oct 14, 2012 6:41 pm
Location: Gainesville, FL

Re: Cheekies

Post by deltaphoenix » Tue Mar 24, 2020 8:41 pm

Was just getting ready to put my bugs together with some 3fw cheeks that I have. Took the screws out of the frames, put the cheeks up to the frames and CRAP. The screws I have are too short.
What type of screw goes into the side of the frame?

Thanks!

User avatar
BugBrand
Knowledge of Bugs
Posts: 7406
Joined: Tue Jul 15, 2008 11:59 am

Re: Cheekies

Post by BugBrand » Wed Mar 25, 2020 3:08 am

Ah, M4 (pan head) - you probably want 16-20mm length but obviously depends on cheek thickness.

User avatar
deltaphoenix
Super Deluxe Wiggler
Posts: 1373
Joined: Sun Oct 14, 2012 6:41 pm
Location: Gainesville, FL

Re: Cheekies

Post by deltaphoenix » Wed Mar 25, 2020 6:34 am

Thanks Tom!

User avatar
batchas
Super Deluxe Wiggler
Posts: 4758
Joined: Wed Nov 09, 2011 2:51 pm

Re: Cheekies

Post by batchas » Tue Jun 09, 2020 3:51 pm

batchas wrote:
Sun Mar 01, 2020 8:51 am
batchas wrote:
Wed Feb 26, 2020 8:40 am
I need actually to re-think the all thing (bottom, depth, 3rd hole placement etc).
So I made all corrections for the cheeks holding the deep frames and I should be able to order soon. Maybe next week.
Once they are made and I know concretely if everything's ok, then I'll share here the files.
I'm making 6 frames cheeks for my old blue system, but I'll do also a layout to share for 5 if needed.
Image

The cheeks are actually a bit higher now than in the 3D preview, so the power cable fits well.
Image
3 months later...
Still seeking M4 black screws, but I couldn't wait to mount the system.
I picked up the cheeks this morning from the painting place and was impatient to check that everything's ok with my measurements.

The painting is powder coating ("thermolaquage" in french). Really fine result. Unfortuantely I didn't think of giving a few cases with the cheeks, to get them in blue, so that when placed at the bottom, the front side would be also blue.
The price for the painting was a flat rate of 65 EUR, so I could have given whatever to do together with the cheeks (it goes all in one cabin).
I paid 153.60 EUR for the pair of alu cheeks. They made them from the DXF files I gave to them. These are for deep frames, though my red modules are in a shallow case for now.
I also made one pair of blue cheeks for shallow cases. I actually cancelled this order by phone 5 mins after sending the order via email, remembering that my old blue system was in deep cases, not shallow! But they forgot I called and they made them. I'll have to check if the cases can be powered once mounted with these cheeks.

With the cheeks the system takes less space than earlier. So I reorganized the studio...

I'll try to make better photos, so you see the space between rows and then I'll share the DXF / SVG files here.
I'll add the shallow ones too after I controlled that all is ok.

And as a friend mentionned, now the system sounds even better :hihi:
Attachments
scrotum-lab-cheeks2.jpg
scrotum-lab-cheeks1.jpg
scrotum-lab-cheeks0.jpg
-----------------------------------
Batchas website
Bandcamp page

sungja
Wiggling with Experience
Posts: 441
Joined: Fri Jun 06, 2008 9:44 am

Re: Cheekies

Post by sungja » Tue Jun 09, 2020 4:10 pm

Looking great! :love:

sungja
Wiggling with Experience
Posts: 441
Joined: Fri Jun 06, 2008 9:44 am

Re: Cheekies

Post by sungja » Wed Jun 10, 2020 5:06 am

Oh i remembered that i am desperately looking for deep rack ears if you consider letting some go. ;)

User avatar
batchas
Super Deluxe Wiggler
Posts: 4758
Joined: Wed Nov 09, 2011 2:51 pm

Re: Cheekies

Post by batchas » Fri Jun 12, 2020 1:57 am

As promised here is the layout for the cheeks holding 6 deep frames, the ones I made for my old blue system.
A layout based on Tom’s design as seen in the first post of the thread.
Feel free to use it. And don’t hesitate to delete the (part of the) logo cutout if you wish.
The ZIP file [310 KB] contains a text file, a .JPG with 3D preview, a .PNG with dimensions and the layout in .DXF, .EPS, .SVG formats:
DOWNLOAD ZIP file

The 3D preview is accurate, but here you can also see on photo the distance between cases:
Photo 1
Photo 2
Photo 3
Photo 4
Attachments
Bugbrand-DEEP-case-6-frames-s.jpg
BugBrand-Modular-System-s.jpg
-----------------------------------
Batchas website
Bandcamp page

sungja
Wiggling with Experience
Posts: 441
Joined: Fri Jun 06, 2008 9:44 am

Re: Cheekies

Post by sungja » Fri Jun 12, 2020 4:21 am

Batchas, if you ever have some deep rack ears you want to sell let me know. Thanks!

/\/\/\/
Common Wiggler
Posts: 146
Joined: Tue Oct 14, 2014 7:30 pm

Re: Cheekies

Post by /\/\/\/ » Thu Jul 23, 2020 6:57 pm

Everyone still loving their 5Frame cheeks? I think I'm going to get some made up in August.
Also, Tom - what thickness of wood are you using for the cheeks?

User avatar
BugBrand
Knowledge of Bugs
Posts: 7406
Joined: Tue Jul 15, 2008 11:59 am

Re: Cheekies

Post by BugBrand » Fri Jul 24, 2020 2:00 am

Think it's 12mm ply.

User avatar
chrisdermo
Ultra Wiggler
Posts: 986
Joined: Sun May 20, 2012 1:52 pm

Re: Cheekies

Post by chrisdermo » Fri Jul 24, 2020 2:26 am

Yep, 2x6mm stuck together
WTB / WTTF: Bugbrand PRC2B, DD3, PRC4, ENV1

Current Bugs frame:
https://www.modulargrid.net/f/racks/view/580413

/\/\/\/
Common Wiggler
Posts: 146
Joined: Tue Oct 14, 2014 7:30 pm

Re: Cheekies

Post by /\/\/\/ » Fri Jul 24, 2020 4:08 pm

Great. Love the 3Frame design but am needing to go vertical.

Post Reply

Return to “BugBrand Devices”