Getting down to C-2 on a Beatstep Pro?

Any music gear discussions that don't fit into one of the other forums.

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
User avatar
woVERTICES
Wiggling with Experience
Posts: 412
Joined: Thu Dec 04, 2014 5:19 pm

Getting down to C-2 on a Beatstep Pro?

Post by woVERTICES » Wed Dec 18, 2019 2:23 pm

I have tried to tune a step knob to C-2 on my BEATSTEP PRO...I cannot seem to be able to get to any
Minus pitches...what am I doing wrong?

Thanks for any advice!
John

User avatar
tito_tunes
Wiggling with Experience
Posts: 304
Joined: Fri Feb 20, 2015 1:33 am
Location: San Franpsycho

Post by tito_tunes » Wed Dec 18, 2019 6:33 pm

Is your oscillator tuned as low as it goes? BSP only puts out positive voltages not negative so your oscillator shouldn’t have any frequency offset for best range
danielriera.bandcamp.com

Samaepstein
Common Wiggler
Posts: 176
Joined: Tue Sep 18, 2012 3:40 pm

Post by Samaepstein » Wed Dec 18, 2019 9:12 pm

i had to mess with the root note in the software editor for the BSP to get bass notes out of my osillators. I hope this helps

Xmit
Veteran Wiggler
Posts: 694
Joined: Wed Jul 11, 2012 2:40 pm

Post by Xmit » Thu Dec 19, 2019 8:44 am

^
yep - same... as has every other BSP user I know & have spoken to about it.

the initial settings when connected to my MS-20M and Mother-32 were causing all the dogs in the neighbourhood to go apeshit.... :hihi:

ran the software & notched the base note down - all good now.

Post Reply

Return to “General Gear”