CV Controlled Looper/Sampler w/ Auto-BPM?

Any music gear discussions that don't fit into one of the other forums.

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
charliechuck01
Learning to Wiggle
Posts: 11
Joined: Wed Feb 19, 2020 1:46 pm

CV Controlled Looper/Sampler w/ Auto-BPM?

Post by charliechuck01 » Mon Mar 23, 2020 7:43 am

I’m looking for a hardware sampler with two specific criteria:
I’d like to be able to record and play a loop, have the device detect the BPM, and send that BPM out via a gate signal in order to set the rate of a Eurorack module.
Secondly, I’d like to be able to trigger specific individual one-shot samples via CV from a Eurorack module.
Any suggestions??
I bought a 1010music Blackbox hoping to do this but it seems like a) it doesn’t have the option to detect BPM of a loop and set the master clock to that bpm, and b) it would require buying a separate CV>MIDI interface.
Wondering if the Elektron Digitakt might be a better fit, but I don’t see CV/Gate IO.

User avatar
Voltcontrol
Wiggling with Experience
Posts: 375
Joined: Thu Jan 25, 2018 1:31 pm
Location: The Netherlands

Re: CV Controlled Looper/Sampler w/ Auto-BPM?

Post by Voltcontrol » Mon Mar 23, 2020 7:54 am

Akai MPC One might fit your bill.

Karl_Joseph
Wiggling with Experience
Posts: 421
Joined: Mon Oct 08, 2012 8:30 pm
Location: Minneapolis

Re: CV Controlled Looper/Sampler w/ Auto-BPM?

Post by Karl_Joseph » Tue Mar 24, 2020 11:11 am

The Gibson/oberheim echoplex digital pro will generate a clock/ clock divisions based on loop duration. It’s the only looper I know that does it.
- KARL

Post Reply

Return to “General Gear”