Korg x-911 and Yamaha CS-15

Discussion and support for MOTU's Volta software.

Moderators: Kent, stretta

Post Reply
pechnatunk
Learning to Wiggle
Posts: 14
Joined: Wed Jan 13, 2010 12:00 am
Location: Londondondon

Korg x-911 and Yamaha CS-15

Post by pechnatunk » Wed Jan 13, 2010 12:13 am

Hi,
wondering what sort of MOTU interface would be suitable for me.
Does anyone happen to know what the voltage range for this korg and yamaha are (think I saw somewhere the yamaha is 0 - 4 volts.)
Also need to know the voltage range for the korg's synthe vcf input?

I dare say the Korg will be the same as the MS20 since they are so similar on the inside. (Maybe not the vcf input).

I'd also be interested to know what voltage would be needed to operate the pedal inputs on the front of the x-911 (Hold, Portamento, etc)

Thanks.

Post Reply

Return to “Volta”