disting mk3 firmware announcement thread

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

User avatar
dubtoms
Common Wiggler
Posts: 122
Joined: Sat May 28, 2016 4:34 am

Post by dubtoms » Wed Jun 07, 2017 2:22 pm

Wow. :yay: :yay: :yay:

User avatar
cliffemu
Veteran Wiggler
Posts: 548
Joined: Thu Feb 16, 2012 12:00 pm
Location: NYC
Contact:

Post by cliffemu » Wed Jun 07, 2017 3:55 pm

Audio recorder is missing from the quick reference FYI

User avatar
os
Super Deluxe Wiggler
Posts: 12419
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Thu Jun 08, 2017 3:32 am

Fix0rd, thanks!

User avatar
handsomepanther
Common Wiggler
Posts: 218
Joined: Sat Jul 27, 2013 11:15 pm
Location: New York
Contact:

Post by handsomepanther » Wed Aug 23, 2017 8:38 pm

my disting mk3 is somehow stuck with the lights flashing, it was like this before the firmware update too.. was hoping to fix it, won't let me switch banks, or algorithms. I tried the latest firmware update, it gets to that same place at :49 seconds in this video but mine stays flashing with all LEDs..

[video][/video]

User avatar
os
Super Deluxe Wiggler
Posts: 12419
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Wed Aug 30, 2017 3:28 am

All LEDs rapidly flashing indicates a hardware fault. Email me.

User avatar
os
Super Deluxe Wiggler
Posts: 12419
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Fri Sep 01, 2017 7:37 am

1st September 2017 - version 3.10:

* Added Stereo Reverb, Mono-to-Stereo Reverb, and Dual Reverb algorithms.
* Added Stereo Chorus and Mono Chorus algorithms.
* Added Waveform Animator algorithm.
* Added Noise algorithm.
* Added Wavetable VCO algorithm.

User avatar
dubtoms
Common Wiggler
Posts: 122
Joined: Sat May 28, 2016 4:34 am

Post by dubtoms » Fri Sep 01, 2017 11:58 am

Awesome !!! :hail:

User avatar
mtsngrs
Learning to Wiggle
Posts: 34
Joined: Thu Sep 10, 2015 3:07 pm
Location: Minneapolis
Contact:

Post by mtsngrs » Sat Sep 02, 2017 2:35 pm

The gift that just keeps giving. Thank you Mr OS

:yay: :yay: :yay: :yay: :yay:

User avatar
araguet
Learning to Wiggle
Posts: 23
Joined: Sun May 31, 2015 8:49 am
Location: Buenos Aires

1V/oct does´t work in VCO modes. MK3

Post by araguet » Sun Dec 31, 2017 6:48 pm

Hi, I tried to sequence with a SQ-1 and Pure Data but there's no way to tune it.

¿Any idea?

-z0r-
Learning to Wiggle
Posts: 3
Joined: Thu Sep 29, 2016 10:16 pm
Location: Australia

Post by -z0r- » Fri Jun 08, 2018 2:24 am

handsomepanther wrote:my disting mk3 is somehow stuck with the lights flashing, it was like this before the firmware update too.. was hoping to fix it, won't let me switch banks, or algorithms. I tried the latest firmware update, it gets to that same place at :49 seconds in this video but mine stays flashing with all LEDs..

[video][/video]
It seems one of my Distings is doing exactly this, ive tried updating firmware multiple times (even tried that custom firmware in the other thread) to no avail.

is there anything I can do?

User avatar
os
Super Deluxe Wiggler
Posts: 12419
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Fri Jun 08, 2018 3:11 am

As I said above, all LEDs rapidly flashing indicates a hardware fault. Email me.

User avatar
dubtoms
Common Wiggler
Posts: 122
Joined: Sat May 28, 2016 4:34 am

Post by dubtoms » Mon Dec 31, 2018 11:25 am

Is there a chance that we will see the new algorhythms developed for mk4 throughout 2018 ported to mk3 ? That would be an a great belated Christmas gift ! :mrgreen:

User avatar
Alphaman
Common Wiggler
Posts: 217
Joined: Sun May 13, 2018 7:43 pm
Location: Germany

Post by Alphaman » Sat May 04, 2019 7:39 am

hello. do i need to install all updates in order or is it enough to install pnly the last update 3.10? does update 3.10 works with the Disting MK3?

User avatar
Alphaman
Common Wiggler
Posts: 217
Joined: Sun May 13, 2018 7:43 pm
Location: Germany

Post by Alphaman » Sat May 04, 2019 6:53 pm

the menu navigation is horrible. switching between the banks and the associated algorhythms and to find a specific function again, is always like a gambling game to me. i often have to turn off the power and turn it on again, because of some weird behaviour. after hours of messing around with this thing, i still don't know how exactly this shitty menu works. that's really annoying. when i don't figure it out in a couple of days, i'll probably get rid of it and buy a less complex effects/multi-function module where the control is faster, because this is the point of modular to me. it makes me angry slowly but steady

User avatar
os
Super Deluxe Wiggler
Posts: 12419
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Sun May 05, 2019 3:09 am

You can go direct to any firmware version.

As you no doubt have seen, the mk3 was replaced by the mk4 some time ago, with an actual screen for easier navigation.

User avatar
Alphaman
Common Wiggler
Posts: 217
Joined: Sun May 13, 2018 7:43 pm
Location: Germany

Post by Alphaman » Sun May 05, 2019 5:24 pm

is the new version easier to handle? anyways...today I've managed to play a MIDI file at least and to create a favourites list which worked a little. but since you can't use the Z knob while a SD card is inserted that i've read in the manual, most of the Algorhythms won't work very well. for example with the reverbs i've had hard time. the midi file (free not clockable) that i tested, was also a bit shorter as it actually should and i have also the feeling, the algorhythms that should be in the 3A bank (according to the manual) are actually in Bank 2. but maybe i'm wrong, because i still not fully managed to keep the order, im mean, what i need to chose first, the banks or the algorhythms. the delay, reverb, chorus effects are of my taste in terms of quality, but there are also lots of other funktions that i want to use. a great module except for the annoying control ;)

junelopez215
1-Post Wiggler
Posts: 1
Joined: Sun Dec 08, 2019 2:28 pm
Location: Philadelphia

Re: disting mk3 firmware announcement thread

Post by junelopez215 » Fri Jan 17, 2020 12:23 am

I am having problems with this 3.10 firmware. I installed all of the firmware to see if there was problem somewhere and everything worked up until I got to this update which is not allowing me to select #2 - I know it work with the other firmware before this one so just perhaps the one you have up loaded on the website is probably the same corrupt file. Can you help me please as I am really liking your product?

User avatar
os
Super Deluxe Wiggler
Posts: 12419
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Re: disting mk3 firmware announcement thread

Post by os » Fri Jan 17, 2020 3:05 am

What do you mean by "select #2"?

Nobody else has complained that firmware v3.10 is corrupt, and it's been here for a couple of years now.

Post Reply

Return to “Expert Sleepers”