Disting Feature Requests

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

Post Reply
User avatar
tam_tam
Learning to Wiggle
Posts: 13
Joined: Fri Jan 11, 2019 1:47 pm
Location: Montreal, Canada

Post by tam_tam » Fri Sep 27, 2019 12:17 pm

dsp909 wrote:A low pass gate would be nice. :)
I agree. Also there are several "dual" function algorithms, please make a dual (clockable) LFO with separate rates. That would be really nice

javes777
Common Wiggler
Posts: 62
Joined: Sun Feb 17, 2019 1:00 pm
Location: Barnsley

Post by javes777 » Tue Oct 01, 2019 1:58 am

Morning Os,

In additional to the request on the Select Bus Problem thread (Is there any chance the z cc could be saved with the select bus, or at least the z value staying at the cc after the save), would it be possible for the parameter changes currently being amended by CC to show on the display? It currently only shows the parameter value changes if that particular parameter is being controlled by the S knob.

Thanks

User avatar
os
Super Deluxe Wiggler
Posts: 13009
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Tue Oct 01, 2019 2:11 am

I'm not sure that's useful - since only the value is displayed, all you'd see would be a load of numbers flashing up with no idea which parameter they referred to.

javes777
Common Wiggler
Posts: 62
Joined: Sun Feb 17, 2019 1:00 pm
Location: Barnsley

Post by javes777 » Tue Oct 01, 2019 2:35 am

Hi os.

My lemur template has all algorithms with each parameter name by each cc slider. So the display for what I’m changing would be useful.

Thanks

javes777
Common Wiggler
Posts: 62
Joined: Sun Feb 17, 2019 1:00 pm
Location: Barnsley

Post by javes777 » Tue Oct 01, 2019 11:58 pm

For example
Last edited by javes777 on Wed Oct 02, 2019 12:03 am, edited 2 times in total.

javes777
Common Wiggler
Posts: 62
Joined: Sun Feb 17, 2019 1:00 pm
Location: Barnsley

Post by javes777 » Wed Oct 02, 2019 12:00 am

For example

[/img]Image

javes777
Common Wiggler
Posts: 62
Joined: Sun Feb 17, 2019 1:00 pm
Location: Barnsley

Post by javes777 » Wed Oct 02, 2019 12:04 am

And I have this for every algorithm.

Image

User avatar
os
Super Deluxe Wiggler
Posts: 13009
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Wed Oct 02, 2019 2:24 am

:jawdrop:

User avatar
Shledge
Super Deluxe Wiggler
Posts: 2989
Joined: Sun Jul 10, 2016 5:47 pm
Location: UK

Post by Shledge » Wed Oct 02, 2019 3:22 am

That makes me want to MIDIfy my distings now.

User avatar
mpl
Common Wiggler
Posts: 100
Joined: Wed Nov 19, 2014 11:36 am
Location: Glasgow

Post by mpl » Wed Oct 02, 2019 9:04 am

That lemur template looks useful any chance of a share? :tu:

User avatar
phutureboy
Veteran Wiggler
Posts: 730
Joined: Mon Mar 02, 2009 5:03 pm

Post by phutureboy » Wed Oct 02, 2019 9:28 am

Maybe I missed something, but does that mean that the Disting is 100% controllable via MIDI ?
FS: EMS Analyse Filterbank B1-II | EMS AKS | RSF Expander I & II | PEARL Syncussion SY-1 | KORG MS-20 | KORG SQ-10

javes777
Common Wiggler
Posts: 62
Joined: Sun Feb 17, 2019 1:00 pm
Location: Barnsley

Post by javes777 » Thu Oct 03, 2019 1:51 am

os wrote::jawdrop:
You should see my FH-1 and 2 template!

Shledge wrote:That makes me want to MIDIfy my distings now.
Do it – one Select Bus Breakout kit can midi all your Distings at the same time.
mpl wrote:That lemur template looks useful any chance of a share? :tu:
Sure – I’ll share when it is finished. That was always my aim.
phutureboy wrote:Maybe I missed something, but does that mean that the Disting is 100% controllable via MIDI ?
Check out page 103 of the manual.

User avatar
phutureboy
Veteran Wiggler
Posts: 730
Joined: Mon Mar 02, 2009 5:03 pm

Post by phutureboy » Sat Oct 05, 2019 4:00 am

phutureboy wrote:Disting is 100% controllable via MIDI
Is it possible to use the ESX-8MD for this ?
FS: EMS Analyse Filterbank B1-II | EMS AKS | RSF Expander I & II | PEARL Syncussion SY-1 | KORG MS-20 | KORG SQ-10

User avatar
os
Super Deluxe Wiggler
Posts: 13009
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Sat Oct 05, 2019 1:50 pm

Should be, yes. Can't say I've tested it.

User avatar
manglepup
Learning to Wiggle
Posts: 22
Joined: Sat Feb 04, 2017 4:07 am

Post by manglepup » Sat Oct 05, 2019 9:58 pm

javes777 wrote:
You should see my FH-1 and 2 template!
I'd love to see your FH-2 template!!

User avatar
phutureboy
Veteran Wiggler
Posts: 730
Joined: Mon Mar 02, 2009 5:03 pm

Post by phutureboy » Sun Oct 06, 2019 2:22 am

os wrote:Should be, yes. Can't say I've tested it.
OK, and how should the 2 modules be connected one to the other ?
FS: EMS Analyse Filterbank B1-II | EMS AKS | RSF Expander I & II | PEARL Syncussion SY-1 | KORG MS-20 | KORG SQ-10

User avatar
os
Super Deluxe Wiggler
Posts: 13009
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Sun Oct 06, 2019 2:51 am

8MD MIDI output into the disting MIDI breakout.

User avatar
phutureboy
Veteran Wiggler
Posts: 730
Joined: Mon Mar 02, 2009 5:03 pm

Post by phutureboy » Sun Oct 06, 2019 3:51 am

yes of course, like any MIDI interface then, but what I meant was more exactly : Is it possible to use the ESX-8MD in place of the MIDI breakout module ?
FS: EMS Analyse Filterbank B1-II | EMS AKS | RSF Expander I & II | PEARL Syncussion SY-1 | KORG MS-20 | KORG SQ-10

User avatar
os
Super Deluxe Wiggler
Posts: 13009
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Post by os » Mon Oct 07, 2019 3:04 am

No.

User avatar
phutureboy
Veteran Wiggler
Posts: 730
Joined: Mon Mar 02, 2009 5:03 pm

Post by phutureboy » Mon Oct 07, 2019 3:37 am

:waah:
FS: EMS Analyse Filterbank B1-II | EMS AKS | RSF Expander I & II | PEARL Syncussion SY-1 | KORG MS-20 | KORG SQ-10

User avatar
Tboy
Learning to Wiggle
Posts: 35
Joined: Wed Apr 18, 2018 2:54 am
Location: Earth

Post by Tboy » Wed Oct 09, 2019 1:14 am

There’s been a discussion going on regarding the 2HP burst module, and if such a thing could be implemented for the Disting. I rather like the idea, so I thought I’d paste the link here:

viewtopic.php?t=221635&sid=7e18bb3392d9 ... 883ce4bbba

User avatar
phutureboy
Veteran Wiggler
Posts: 730
Joined: Mon Mar 02, 2009 5:03 pm

Post by phutureboy » Wed Oct 09, 2019 10:10 am

phutureboy wrote:Is it possible to use the ESX-8MD in place of the MIDI breakout module ?
os wrote:No.
I really hope we can have a Disting MK5 with the mini-jack MIDI IN included in the front panel...
FS: EMS Analyse Filterbank B1-II | EMS AKS | RSF Expander I & II | PEARL Syncussion SY-1 | KORG MS-20 | KORG SQ-10

User avatar
solipsvs
Wiggling with Experience
Posts: 441
Joined: Wed Jan 13, 2016 8:39 pm
Location: i love you eric

Post by solipsvs » Wed Oct 09, 2019 10:35 pm

can i get it to write riffs? :cat:

User avatar
drewfx1
Common Wiggler
Posts: 154
Joined: Tue May 26, 2015 11:24 am

Post by drewfx1 » Thu Oct 10, 2019 1:08 pm

solipsvs wrote:can i get it to write riffs? :cat:
Already there - F-6 Shift Register Random Quantized CVs.

:hihi:

User avatar
solipsvs
Wiggling with Experience
Posts: 441
Joined: Wed Jan 13, 2016 8:39 pm
Location: i love you eric

Post by solipsvs » Fri Oct 11, 2019 10:36 am

:love:

Post Reply

Return to “Expert Sleepers”