ES-3 signal back to voice controller Studio One 4.6

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

Post Reply
Synthesist
Learning to Wiggle
Posts: 4
Joined: Sun Aug 30, 2015 1:24 am
Location: Sweden

ES-3 signal back to voice controller Studio One 4.6

Post by Synthesist » Sat Jan 11, 2020 1:37 am

Hi

How to setup the voice controller in Studio One 4.6.

This is my set up:

ES-3 output 1 to a osc pitch in v/oct, '
ES3-2 output 2 to gate input.

I have all my ADAT outputs in DAW set up correctly. The routing in the voice controller i set to 6 mono outputs.
So I can hear the sound from the oscillator playing my midi keyboard. The gate works but I can´t alter the pitch.
I believe I need to perform the calibration first. Now, how to make things happen with the feedback sound into the plugin?

BTW I use Apollo x8 sound card.

Please please explain.

best
T

Synthesist
Learning to Wiggle
Posts: 4
Joined: Sun Aug 30, 2015 1:24 am
Location: Sweden

Re: ES-3 signal back to voice controller Studio One 4.6

Post by Synthesist » Sat Jan 11, 2020 4:22 am

Finally solved it....//T

Post Reply

Return to “Expert Sleepers”