5-pin DIN MIDI

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

Post Reply
micdrop11
Learning to Wiggle
Posts: 3
Joined: Sat Feb 01, 2020 9:32 pm

5-pin DIN MIDI

Post by micdrop11 » Sat Feb 01, 2020 9:41 pm

For the FH-2 expansion to 5-pin DIN MIDI, what is the default output number? I'm trying to output basic start/stop and clock information from the MIDI Out to an analog drum machine.

I've tested the 5-pin DIN MIDI module and it appears to be working. I've sent MIDI information to the IN socket and the FH-2 acknowledges the incoming MIDI information on its screen.

Appreciate any help.

Thanks,
Mike

User avatar
os
Super Deluxe Wiggler
Posts: 12396
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Re: 5-pin DIN MIDI

Post by os » Sun Feb 02, 2020 4:30 am

what is the default output number?
Not sure what you mean by that.

It may be relevant to point out that you have to enable the DIN MIDI output in the FH-2 settings.

micdrop11
Learning to Wiggle
Posts: 3
Joined: Sat Feb 01, 2020 9:32 pm

Re: 5-pin DIN MIDI

Post by micdrop11 » Sun Feb 02, 2020 9:39 am

Thanks for the help. I didn't realize that I needed to enable the output in Settings.

However, after enabling that Setting, I'm still struggling to send MIDI information out over the 5-pin DIN MIDI expander... Any other thoughts?

(FYI, when I asked about a default output, I was wondering if I need to configure something in the "FH-2 Output Configurator" to send this MIDI information out.)

micdrop11
Learning to Wiggle
Posts: 3
Joined: Sat Feb 01, 2020 9:32 pm

Re: 5-pin DIN MIDI

Post by micdrop11 » Sun Feb 02, 2020 9:50 am

Got it! I think I figured it out. I configured the MIDI Forwarding.

Post Reply

Return to “Expert Sleepers”