quick/easy question ES-6 to ES-3 connection

Discussion and support for Expert Sleepers' Silent Way software and hardware.

Moderators: Kent, os

Post Reply
User avatar
4schultz1
Learning to Wiggle
Posts: 8
Joined: Wed Sep 19, 2018 7:16 pm
Location: USA

quick/easy question ES-6 to ES-3 connection

Post by 4schultz1 » Thu Feb 06, 2020 8:41 am

Does it matter which orientation I connect the 'expander' cable from the ES-6 to the ES-3 header? I have it connect to the header labeled to ES-6, but didn't know if the -12 pin had to be 'up' or 'down'

User avatar
os
Super Deluxe Wiggler
Posts: 12419
Joined: Tue Jun 30, 2009 6:55 am
Location: UK
Contact:

Re: quick/easy question ES-6 to ES-3 connection

Post by os » Thu Feb 06, 2020 8:47 am

Yes, it matters. The cable should be oriented the same way at both ends.

User avatar
4schultz1
Learning to Wiggle
Posts: 8
Joined: Wed Sep 19, 2018 7:16 pm
Location: USA

Re: quick/easy question ES-6 to ES-3 connection

Post by 4schultz1 » Thu Feb 06, 2020 8:54 am

that makes sense, thank you!

Post Reply

Return to “Expert Sleepers”