Incoming Project: Multimix for Eurorack

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3058
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Incoming Project: Multimix for Eurorack

Post by Synthbuilder » Fri Jun 28, 2019 5:14 am

Image

More details on the project webpage:

http://www.oakleysound.com/multimix-e.htm

Boards are available now but documentation probably won't be ready for a few days yet.

Tony

User avatar
Leverkusen
Super Deluxe Wiggler
Posts: 2336
Joined: Mon Jul 29, 2013 2:26 am
Location: Suhlendorf

Post by Leverkusen » Fri Jun 28, 2019 6:10 am

Your new euro developments have a very clean and pleasing look! I would be tempted by this one if I had not boards for the MI mixer modules in my drawer. They are very small SMD, so I might come back to this one if I struggle too much building them.

(You might have been a bit too quick with pasting the description from the HVM to the Multimix though:hihi:)

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3058
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Post by Synthbuilder » Fri Jun 28, 2019 7:09 am

Leverkusen wrote:You might have been a bit too quick with pasting the description from the HVM to the Multimix though...
Missed that one. Must remember to use CTRL+F next time. Thanks for letting me know. :tu:

I'm not sure which module to convert next. Perhaps the COTA or the DSL. Got some documentation to write first though...

Tony

User avatar
Leverkusen
Super Deluxe Wiggler
Posts: 2336
Joined: Mon Jul 29, 2013 2:26 am
Location: Suhlendorf

Post by Leverkusen » Fri Jun 28, 2019 5:04 pm

Synthbuilder wrote:
Leverkusen wrote:You might have been a bit too quick with pasting the description from the HVM to the Multimix though...
Missed that one. Must remember to use CTRL+F next time. Thanks for letting me know. :tu:

I'm not sure which module to convert next. Perhaps the COTA or the DSL. Got some documentation to write first though...

Tony
To me the DSL is the best of your filter modules by now. The Croglin might be the most interesting though and has a cool name. :zombie:

Personally, I would like a conversion of the sequencer module... :mrgreen:

User avatar
Pav
Wiggling with Experience
Posts: 317
Joined: Sat Mar 19, 2016 3:21 pm
Location: UK Hampshire

Post by Pav » Sat Jun 29, 2019 10:50 am

The ASV vco board has +12v -12v ..so a eurorack VCO derivative seems a candidate.

+1 for sequencer too.
rgds Pav

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3058
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Post by Synthbuilder » Sat Jun 29, 2019 12:04 pm

Pav wrote:The ASV vco board has +12v -12v ..so a eurorack VCO derivative seems a candidate.
Yes, a VCO is planned. Probably based around the ASV's one - which actually isn't that disimilar to the '1 of 3'. Sadly I can't actually use the raw Eurorack +/-12V for the VCO core since it needs to be cleaner and more stable than that. The ASV runs from +/-15V and then generates its own clean +/-12V supply for each VCO.
+1 for sequencer too.
I would like to do it for 5U but it's quite a big investment because of the size of the boards and panel, and the sheer number of switches and pots to buy. So probably not this year. I guess, in part, the timing of any 5U sequencer will depend on how well sales are going for my other boards.

Tony

Post Reply

Return to “Oakley Sound Systems”