Incoming Project: COTA for Eurorack

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3059
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Incoming Project: COTA for Eurorack

Post by Synthbuilder » Thu Aug 22, 2019 10:30 am

My first filter for Eurorack.

Image

COTA in 10HP. Surface mount and through hole. The mixer is a variation of the one in the Fourmix so it has a soft clip mode that in the COTA can be switched in and out.

Image

The boards have been built and tested and I'll be writing the documentation over the next few days.

More details at the usual place:

http://www.oakleysound.com/COTA-e.htm

I'll also get some eurorack specific sound samples done shortly. The ones on the project page are just the 5U ones for the moment.

Tony

KoryB
Common Wiggler
Posts: 246
Joined: Fri Jun 17, 2016 12:07 am
Location: Bay Area

Post by KoryB » Fri Aug 23, 2019 11:05 pm

Interested.
Price?

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3059
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Post by Synthbuilder » Sat Aug 24, 2019 7:51 am

KoryB wrote:Price?
The two PCB set is 18GBP (pounds sterling) plus 5GBP shipping.

The Builder's Guide which includes a full parts list should be available next week.

Tony

KoryB
Common Wiggler
Posts: 246
Joined: Fri Jun 17, 2016 12:07 am
Location: Bay Area

Post by KoryB » Sat Aug 24, 2019 5:34 pm

Thanks!

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3059
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Post by Synthbuilder » Wed Aug 28, 2019 7:28 am

PCBs and Builder's Guide now available. :hyper:

http://www.oakleysound.com/COTA-e.htm

Tony

Post Reply

Return to “Oakley Sound Systems”