ADSR/VCA issue 5 PCB: resistor R39.
In the schematics it is 2M2, but in the builders guide V 5.4 it is 1M5.
Which value to use?
ADSR resistor value question
Moderators: Kent, Synthbuilder
- terjewinther
- Common Wiggler
- Posts: 217
- Joined: Wed Sep 02, 2009 1:51 am
- Location: Norway
- Synthbuilder
- Super Deluxe Wiggler
- Posts: 3102
- Joined: Tue Mar 24, 2009 9:12 am
- Location: Cumbria, UK
Re: ADSR resistor value question
1M5.terjewinther wrote: ↑Wed Mar 04, 2020 5:33 pmIn the schematics it is 2M2, but in the builders guide V 5.4 it is 1M5.
Which value to use?
The Builder's Guide (BG) always takes priority over the schematic. I do update schematics but not always since the process is somewhat cumbersome. The BG always represents the most up to date information. One of the main reasons for this is that the schematic is only sent to customers on the day the boards are sent to them so it's not feasible to update the schematics to every customer each time a small change is made. The BG is, however, updated as soon as I find a problem with it, or an improvement can be made.
Tony
- terjewinther
- Common Wiggler
- Posts: 217
- Joined: Wed Sep 02, 2009 1:51 am
- Location: Norway
Re: ADSR resistor value question
Thanks!