.VCA CN1 Header?

Discussion and support for STG Soundlabs modules of all formats.

Moderators: Kent, suitandtieguy

Post Reply
User avatar
cheapmachines
Wiggling with Experience
Posts: 301
Joined: Tue Oct 04, 2011 8:16 am
Location: London, UK

.VCA CN1 Header?

Post by cheapmachines » Wed Jul 22, 2015 1:54 am

What is the white five pin header marked CN1 on the .VCA board intended for?

Thanks!

User avatar
suitandtieguy
Hammond King
Posts: 3372
Joined: Sun Feb 03, 2008 11:50 pm
Location: Chillicothe IL USA

Post by suitandtieguy » Thu Jul 23, 2015 4:20 am

it is a Synthesizers.com compliant power connector.

it is parallel with the Doepfer power connector and can be used to daisy-chain power between most STG Soundlabs modules (undocumented feature.)

details at: http://synthesizers.com/technical.html
http://suitandtieguy.com
http://stgsoundlabs.com
http://knobcon.com
suboptimal wrote:... if it's music you want to make with your modular, STG should be in your system.

User avatar
cheapmachines
Wiggling with Experience
Posts: 301
Joined: Tue Oct 04, 2011 8:16 am
Location: London, UK

Post by cheapmachines » Thu Jul 23, 2015 12:00 pm

Great, thanks for the info.

User avatar
silverapple
Learning to Wiggle
Posts: 16
Joined: Tue Jun 30, 2015 8:05 pm
Location: United States

Post by silverapple » Fri Jul 31, 2015 10:44 pm

I was wondering what that header did myself. Thanks. Could be useful.
I've done the math enough to know the dangers of our second guessing.

Post Reply

Return to “STG Soundlabs”