Double Andore Mk2

Digital Audio Electronics - discussion & support.

Moderators: Kent, solidox, governor blacksnake

Post Reply
User avatar
ikkini
Veteran Wiggler
Posts: 677
Joined: Wed May 16, 2012 3:13 pm
Location: Angers - France

Double Andore Mk2

Post by ikkini » Sun Sep 14, 2014 2:54 pm

From Richard Devine :

Image

Where are the wavetables ???

User avatar
Ted
1980
Posts: 448
Joined: Wed Aug 18, 2010 6:34 pm
Location: Saint Louis
Contact:

Post by Ted » Sun Sep 14, 2014 3:51 pm

Need more informa-tions.

User avatar
ether
Super Deluxe Wiggler
Posts: 1084
Joined: Sun Nov 14, 2010 5:11 pm
Location: Is Chicago. Is not Chicago.

Post by ether » Sun Sep 14, 2014 5:20 pm

I like that a lot. I always held off on the v1 due to the slightly mind bending mirrored panel design.

User avatar
robotopsy
Veteran Wiggler
Posts: 716
Joined: Thu Dec 20, 2012 1:55 am
Location: Canada

Post by robotopsy » Mon Sep 15, 2014 12:45 am

Image


Looks like you cant have EoD and EoA on 2 seperate output for each env
I know the first one so well this one looks more confusing :nana: [/img]

User avatar
koshi
Common Wiggler
Posts: 215
Joined: Wed Jan 20, 2010 6:01 pm
Location: Aotearoa

Post by koshi » Mon Sep 15, 2014 11:45 am

Wonder if its smaller. Would have been cool if it was 18HP.
Third bottom slider might be the one to choose wavetables. VCA Drone?

User avatar
ikkini
Veteran Wiggler
Posts: 677
Joined: Wed May 16, 2012 3:13 pm
Location: Angers - France

Post by ikkini » Mon Sep 15, 2014 1:06 pm

No I think VCA Drone is the attenuator at the bottom of mk1 since it leaves the VCA open when fully turned on >>> drone !

User avatar
governor blacksnake
ant in the afterbirth
Posts: 856
Joined: Sat Dec 01, 2007 1:28 pm
Location: seattle

Post by governor blacksnake » Mon Sep 15, 2014 5:34 pm

Preliminary information:

- 19HP
- Stable and reliable behavior compared to mk1
- wavetables, envelope mixing, and advanced envelope controls will be available on an expander in the future
- EOA/EOD/both pulses selectable at one output
- full-scale Env output
- attenuverted Env output
- all VCA control sources have dedicated knobs instead of buttons (attenuverters where appropriate)
- log/lin shape control with VC
- slew mode (outputs full-wave rectified and slewed version of signal present at env trigger jack)
- availability december/january

User avatar
koshi
Common Wiggler
Posts: 215
Joined: Wed Jan 20, 2010 6:01 pm
Location: Aotearoa

Post by koshi » Mon Sep 15, 2014 5:36 pm

Makes sense ikkini. Looking forward to hear more about it.

User avatar
koshi
Common Wiggler
Posts: 215
Joined: Wed Jan 20, 2010 6:01 pm
Location: Aotearoa

Post by koshi » Mon Sep 15, 2014 5:44 pm

The info came quicker then I thought :omg:

User avatar
Hainbach
Super Deluxe Wiggler
Posts: 3437
Joined: Thu May 26, 2011 3:52 am
Location: Berlin

Post by Hainbach » Mon Sep 15, 2014 5:47 pm

Interesting update, slew mode sounds good!
I will stay with the MK1, especially because I want the compact yet playable size and I love the nice buttons. DA 1 is pretty much perfect in my opinion, only the lockups it has sometimes in OSC mode are annoying. Back when I asked Schneiders about it they were like "oh, we would have to sent it in, that will take months". So I never bothered.

Was there ever a fix for the lockups that did not involve sending in the DA?

User avatar
koshi
Common Wiggler
Posts: 215
Joined: Wed Jan 20, 2010 6:01 pm
Location: Aotearoa

Post by koshi » Mon Sep 15, 2014 6:40 pm

Hainbach wrote:Interesting update, slew mode sounds good!
I will stay with the MK1, especially because I want the compact yet playable size and I love the nice buttons. DA 1 is pretty much perfect in my opinion, only the lockups it has sometimes in OSC mode are annoying. Back when I asked Schneiders about it they were like "oh, we would have to sent it in, that will take months". So I never bothered.

Was there ever a fix for the lockups that did not involve sending in the DA?
I agree about MK1 being perfect. I don't think I will manage to fit another one in my case tbh.

Never managed to lock mine and I think I abuse it quite a bit. How do you do it? On mine all diodes illuminate once I send super fast clock to trigger ins but it never locks.. Sorry for off topic.

User avatar
Hainbach
Super Deluxe Wiggler
Posts: 3437
Joined: Thu May 26, 2011 3:52 am
Location: Berlin

Post by Hainbach » Mon Sep 15, 2014 7:09 pm

koshi wrote:
Hainbach wrote:Interesting update, slew mode sounds good!
I will stay with the MK1, especially because I want the compact yet playable size and I love the nice buttons. DA 1 is pretty much perfect in my opinion, only the lockups it has sometimes in OSC mode are annoying. Back when I asked Schneiders about it they were like "oh, we would have to sent it in, that will take months". So I never bothered.

Was there ever a fix for the lockups that did not involve sending in the DA?
I agree about MK1 being perfect. I don't think I will manage to fit another one in my case tbh.

Never managed to lock mine and I think I abuse it quite a bit. How do you do it? On mine all diodes illuminate once I send super fast clock to trigger ins but it never locks.. Sorry for off topic.
Its when its in OSC mode: turn down attack and decay on both sides to lowest setting. Set to loop. Modulate time with a sequencer. Mine has 50:50 chance of locking up within half an hour.

User avatar
ether
Super Deluxe Wiggler
Posts: 1084
Joined: Sun Nov 14, 2010 5:11 pm
Location: Is Chicago. Is not Chicago.

Post by ether » Mon Sep 15, 2014 10:34 pm

Dejanbruary?

User avatar
koshi
Common Wiggler
Posts: 215
Joined: Wed Jan 20, 2010 6:01 pm
Location: Aotearoa

Post by koshi » Tue Sep 16, 2014 6:22 am

Hainbach mine seems fine then. Never had an issue with that.
Looking at MK2 it should play well with MK1

:sb:

User avatar
Kakihara
Super Deluxe Wiggler
Posts: 1006
Joined: Mon Mar 30, 2009 3:36 pm
Location: Montréal, Québec

Post by Kakihara » Tue Sep 16, 2014 9:44 am

That is nice! Yeah mine lock up when I drive them as vco with another vco or something :)
2 MK1 and one Mk2 could be interesting ;)

User avatar
ynth
You're a gazelle
Posts: 179
Joined: Thu Apr 01, 2010 8:32 am
Location: Route 66
Contact:

Post by ynth » Tue Sep 16, 2014 1:37 pm

Looks great, though I'll miss the MK1's Harvestman skull & star logo :waah:

User avatar
Ted
1980
Posts: 448
Joined: Wed Aug 18, 2010 6:34 pm
Location: Saint Louis
Contact:

Post by Ted » Mon Sep 22, 2014 9:30 pm

With all these mk2 versions coming out, I'll finally be able to rebuild my original mk1 all-Harvestman case for like :75:

User avatar
ikkini
Veteran Wiggler
Posts: 677
Joined: Wed May 16, 2012 3:13 pm
Location: Angers - France

Post by ikkini » Tue Sep 23, 2014 2:23 am

Well more than upadates, these are different modules... As far as I'm concerned I'll keep my HD mk1 and DA Mk1.

User avatar
primemover
Common Wiggler
Posts: 221
Joined: Fri Jun 10, 2011 3:32 pm
Location: Stockholm, Sweden.

Post by primemover » Sun Oct 19, 2014 3:22 am

How about distortion on the vcas? it was sweet on the mk1.

User avatar
FatRocky
Super Deluxe Wiggler
Posts: 2611
Joined: Sun Oct 16, 2011 12:56 pm

Post by FatRocky » Thu Nov 13, 2014 9:45 am

:yay: excellent

the last mk1 in my system is my DA.

i'll keep it anyway

User avatar
FatRocky
Super Deluxe Wiggler
Posts: 2611
Joined: Sun Oct 16, 2011 12:56 pm

Post by FatRocky » Thu Nov 13, 2014 9:47 am

:nana: :yay: excellent
Last edited by FatRocky on Wed Dec 10, 2014 8:39 pm, edited 1 time in total.

User avatar
gottberg
Wiggling with Experience
Posts: 420
Joined: Sun Apr 13, 2014 9:02 am

Post by gottberg » Sat Nov 22, 2014 1:31 am

:party:

User avatar
mats_j
Common Wiggler
Posts: 122
Joined: Fri Feb 08, 2013 12:08 pm
Location: Stockholm, Sweden

Post by mats_j » Mon Jan 26, 2015 9:09 am

I got some brief glances of this from various NAMM coverage, but has anyone found a more detailed overview anywhere?

User avatar
thelizard
in it for the money
Posts: 1392
Joined: Sun Aug 30, 2009 3:27 pm
Location: Houston, TX

Post by thelizard » Mon Jan 26, 2015 12:56 pm

mats_j wrote:I got some brief glances of this from various NAMM coverage, but has anyone found a more detailed overview anywhere?
I spoke with Scott at NAMM. The variable waveshapes from DA1 are going to show up on an expander module.

User avatar
ether
Super Deluxe Wiggler
Posts: 1084
Joined: Sun Nov 14, 2010 5:11 pm
Location: Is Chicago. Is not Chicago.

Post by ether » Mon Jan 26, 2015 4:00 pm

Shipping date?

Post Reply

Return to “The Harvestman”