IME Andore

Digital Audio Electronics - discussion & support.

Moderators: Kent, solidox, governor blacksnake

User avatar
hawkfuzz
Super Deluxe Wiggler
Posts: 1786
Joined: Fri Feb 19, 2010 6:33 pm
Location: East Coast
Contact:

IME Andore

Post by hawkfuzz » Tue Mar 20, 2018 8:25 pm

No updates but wanted to make it's own thread. Maybe the Gub'ner will pop in and give some more info. About to reduce and want to replan with this thing if I can.

User avatar
Sinamsis
Super Deluxe Wiggler
Posts: 4202
Joined: Tue Jul 22, 2014 9:36 am
Location: Richmond, VA

Post by Sinamsis » Tue Mar 20, 2018 8:29 pm

I'm pretty stoked. Commenting to follow. But I have no infos.

User avatar
robotopsy
Veteran Wiggler
Posts: 716
Joined: Thu Dec 20, 2012 1:55 am
Location: Canada

Post by robotopsy » Thu Mar 22, 2018 11:26 pm

I assume it will be like the makenoise function is the half of the MATHS,
I just hope the ANDORE will be wavetable :yay:
I'm pretty sure it will have a bunch of cool stuff :nana:

User avatar
mt3
Super Deluxe Wiggler
Posts: 2872
Joined: Thu Oct 09, 2014 11:18 pm
Location: vancity
Contact:

Post by mt3 » Sat Mar 24, 2018 3:50 am

:party:

User avatar
hawkfuzz
Super Deluxe Wiggler
Posts: 1786
Joined: Fri Feb 19, 2010 6:33 pm
Location: East Coast
Contact:

Post by hawkfuzz » Tue Oct 23, 2018 6:37 am

I want you to be real

User avatar
gringostar
Wiggling with Experience
Posts: 314
Joined: Sun May 21, 2017 7:59 pm
Location: The Nameless City

Post by gringostar » Tue Oct 23, 2018 10:33 am

Out of all the new offerings that have been shown since NAMM 2017 the Andore Jr and the Hertz Donut mk]|[ have been the two IME modules I've been the most excited about.

User avatar
hawkfuzz
Super Deluxe Wiggler
Posts: 1786
Joined: Fri Feb 19, 2010 6:33 pm
Location: East Coast
Contact:

Post by hawkfuzz » Tue Oct 23, 2018 1:36 pm

Space saving 4 stage enelope w/vca w/lpg is just too hot not to trot. I bet his hang up is probably execution of controls. He seems to put a lot of thought into layout. I just want it. Wires can and will go everywhere.

User avatar
Sinamsis
Super Deluxe Wiggler
Posts: 4202
Joined: Tue Jul 22, 2014 9:36 am
Location: Richmond, VA

Post by Sinamsis » Tue Oct 23, 2018 8:38 pm

hawkfuzz wrote:Space saving 4 stage enelope w/vca w/lpg is just too hot not to trot. I bet his hang up is probably execution of controls. He seems to put a lot of thought into layout. I just want it. Wires can and will go everywhere.
I think Scott just has a lot of irons in the fire, and is focusing on finishing one task at a time on top of keeping existing modules in stock. Right now, I think the focus is getting the HD mk III out in the wild, and he's added quite a few features there. I think the Single Andore is next on his plate. Hopefully we see it before years end. Personally I'm stoked for everything new that he's making, including this module and the new Bionic Lester.

User avatar
gringostar
Wiggling with Experience
Posts: 314
Joined: Sun May 21, 2017 7:59 pm
Location: The Nameless City

Post by gringostar » Wed Oct 24, 2018 11:25 am

Sinamsis wrote:I think Scott just has a lot of irons in the fire, and is focusing on finishing one task at a time on top of keeping existing modules in stock. Right now, I think the focus is getting the HD mk III out in the wild, and he's added quite a few features there. I think the Single Andore is next on his plate. Hopefully we see it before years end. Personally I'm stoked for everything new that he's making, including this module and the new Bionic Lester.
While I agree with you that it's probably coming next after the HD mk ]|[ I kind of doubt we'll see it before years end with how the HD mk ]|[ went through a pretty radical redesign half way through it's development. I could be wrong on that but I think earliest we'll see it in it's final form is winter NAMM and it being shipped out to retailers shortly after.

User avatar
Sinamsis
Super Deluxe Wiggler
Posts: 4202
Joined: Tue Jul 22, 2014 9:36 am
Location: Richmond, VA

Post by Sinamsis » Wed Oct 24, 2018 12:10 pm

gringostar
Ha yeah please note I said hopefully. Haha I wouldn’t be surprised if it got delayed. Scott may choose to revise something to make it fit better in his vision of the Harvestman ecosystem. That said I have preorders in for the HD mk III, Andore and BL mk II already and that’s the very tentative time table Scott gave me.

User avatar
hawkfuzz
Super Deluxe Wiggler
Posts: 1786
Joined: Fri Feb 19, 2010 6:33 pm
Location: East Coast
Contact:

Post by hawkfuzz » Thu Oct 25, 2018 8:09 pm

gringostar wrote:
Sinamsis wrote:I think Scott just has a lot of irons in the fire, and is focusing on finishing one task at a time on top of keeping existing modules in stock. Right now, I think the focus is getting the HD mk III out in the wild, and he's added quite a few features there. I think the Single Andore is next on his plate. Hopefully we see it before years end. Personally I'm stoked for everything new that he's making, including this module and the new Bionic Lester.
While I agree with you that it's probably coming next after the HD mk ]|[ I kind of doubt we'll see it before years end with how the HD mk ]|[ went through a pretty radical redesign half way through it's development. I could be wrong on that but I think earliest we'll see it in it's final form is winter NAMM and it being shipped out to retailers shortly after.
What are ya talking about?

User avatar
Sinamsis
Super Deluxe Wiggler
Posts: 4202
Joined: Tue Jul 22, 2014 9:36 am
Location: Richmond, VA

Post by Sinamsis » Thu Oct 25, 2018 11:33 pm

hawkfuzz wrote:
gringostar wrote:
Sinamsis wrote:I think Scott just has a lot of irons in the fire, and is focusing on finishing one task at a time on top of keeping existing modules in stock. Right now, I think the focus is getting the HD mk III out in the wild, and he's added quite a few features there. I think the Single Andore is next on his plate. Hopefully we see it before years end. Personally I'm stoked for everything new that he's making, including this module and the new Bionic Lester.
While I agree with you that it's probably coming next after the HD mk ]|[ I kind of doubt we'll see it before years end with how the HD mk ]|[ went through a pretty radical redesign half way through it's development. I could be wrong on that but I think earliest we'll see it in it's final form is winter NAMM and it being shipped out to retailers shortly after.
What are ya talking about?
I think he’s referring to adding the Casio CZ style phase modulation, etc.

User avatar
gringostar
Wiggling with Experience
Posts: 314
Joined: Sun May 21, 2017 7:59 pm
Location: The Nameless City

Post by gringostar » Fri Oct 26, 2018 11:13 am

Sinamsis wrote: I think he’s referring to adding the Casio CZ style phase modulation, etc.
Yup.

In the first demo of the HD Scott talked about it being a traditional 3op DX-7 phase modulation voice and then in the following demo with the chiptune primer it was redesigned to be a 3op phase distortion voice which only the casio CZ models have had.

User avatar
hawkfuzz
Super Deluxe Wiggler
Posts: 1786
Joined: Fri Feb 19, 2010 6:33 pm
Location: East Coast
Contact:

Post by hawkfuzz » Mon Oct 29, 2018 12:42 pm

Ah, I didn't even catch that.

User avatar
gringostar
Wiggling with Experience
Posts: 314
Joined: Sun May 21, 2017 7:59 pm
Location: The Nameless City

Post by gringostar » Thu Dec 27, 2018 10:21 pm

Cross-posting this from the thread where it was introduced:

governor blacksnake wrote:Dynamics are the name of the game here. The LPG is a VCA-based circuit (fwiw it's analog), but since you've got the shape control and a 4-stage envelope you may dial in an imitation of whatever *other circuit* behavior you like. The mode button does the expected VCA/LPF/both switching. There is a 2-input unity gain mixer on the VCA. It has character.

Andore is a dual envelope (dedicated trigger ins and env outs, shared controls. Envelope 2 is accessed by holding a button down and modifying the desired controls.) The shape control is a crossfade between linear and RC responses (log attack, expo decay). The velocity control has a dedicated CV input. It controls the overall height of the envelope voltage. Since it's shared between two envelopes, the velocity value is sampled at the start of each envelope trigger (mysteron style). There is also a single general purpose CV input, assignable to any of the env stages or the shape control. The envelope mode button switches from ADSR to ADSD (with the fourth slider acting as the sustain time control) to AHD to AD (self cycling). CV inputs are shared between the envelopes but the attenuverters and destinations may differ. Nobody's forcing you to use the second envelope.

Trimmers are provided to tweak the linearity of the VCA in combo mode and to add a small amount of resonance to the filter. There is an analog VCA CV input and a dedicated attenuverter for sending Envelope 1 to the VCA.

Andore is designed to quickly and conveniently provide voice control to any sound source, and offer further modulation opportunities. Relax, it's supposed to be this simple. Offered as an alternative to the large/cranky/expensive Double Andore.

User avatar
robotopsy
Veteran Wiggler
Posts: 716
Joined: Thu Dec 20, 2012 1:55 am
Location: Canada

Post by robotopsy » Fri Dec 28, 2018 10:03 am

I'll be needing 2 Andore.... otherwise he'll be so alone with all those Double Andore.

User avatar
mt3
Super Deluxe Wiggler
Posts: 2872
Joined: Thu Oct 09, 2014 11:18 pm
Location: vancity
Contact:

Post by mt3 » Fri Dec 28, 2018 9:53 pm

robotopsy wrote:I'll be needing 2 Andore.... otherwise he'll be so alone with all those Double Andore.
Triple Andore to pair with Hertz Donut mk III.

:harvestman: :guitar: :fap:

User avatar
gringostar
Wiggling with Experience
Posts: 314
Joined: Sun May 21, 2017 7:59 pm
Location: The Nameless City

Post by gringostar » Wed Jan 02, 2019 1:35 pm

I'm going with 1 Andore and 1 Mk1 Double Andore… which is basically a triple Andore.

User avatar
dysonant
Super Deluxe Wiggler
Posts: 1486
Joined: Tue Nov 11, 2014 10:18 pm
Location: NYC
Contact:

Post by dysonant » Mon Feb 11, 2019 8:59 am

Now that both MKIII oscillators are released I am hoping that Andore Jr. become the main focus. I also have been thinking about two of these.

Curiously, from the Gov Blacksnake quote above it seems that the two envelopes will use the same knobs, but with the button press you can control the slopes independently, am I reading that right?

liquidsn
Learning to Wiggle
Posts: 44
Joined: Sun Oct 28, 2018 8:32 pm
Location: nyc

Post by liquidsn » Sat Mar 09, 2019 11:05 am

Man... Really looking at the Double Andore mk2. Anyone know any news if there is a mk3 coming out?

User avatar
monoscan
Wiggling with Experience
Posts: 269
Joined: Wed Feb 22, 2017 10:18 pm
Location: Chicago, IL

Post by monoscan » Mon Mar 11, 2019 1:33 pm

liquidsn wrote:Man... Really looking at the Double Andore mk2. Anyone know any news if there is a mk3 coming out?
For the price of two envelopes and two VCAs, the Double Andore MK2 ends up being a pretty fair price. I love mine and think it is super useful. I think regardless what happens with future Andores, the MK2 is worth a purchase.

liquidsn
Learning to Wiggle
Posts: 44
Joined: Sun Oct 28, 2018 8:32 pm
Location: nyc

Post by liquidsn » Mon Mar 18, 2019 1:32 pm

Yeah, I got it.
Piston Honda MK3, Hertz Donut MK3, Double Andore MK2.
Have the holy trinity. :D

The Andore feels like a Maths I would use more because of the VCA attached. Love the trigger on EOA/EOD combined.

User avatar
hawkfuzz
Super Deluxe Wiggler
Posts: 1786
Joined: Fri Feb 19, 2010 6:33 pm
Location: East Coast
Contact:

Post by hawkfuzz » Tue Apr 23, 2019 3:44 pm

Still wanting

User avatar
PietroC
Common Wiggler
Posts: 114
Joined: Fri Apr 05, 2019 2:17 pm
Location: Montreal

Post by PietroC » Sun Sep 08, 2019 8:06 pm

No Preset Manager for Andore JR or just the prototype is this way ???

User avatar
hawkfuzz
Super Deluxe Wiggler
Posts: 1786
Joined: Fri Feb 19, 2010 6:33 pm
Location: East Coast
Contact:

Post by hawkfuzz » Sun Sep 08, 2019 8:19 pm

I don't believe a preset manager for that module was ever mentioned for the JR ever.
THUMPR BC SC

Post Reply

Return to “The Harvestman”