805.VS2

New Interfaces for Analog Synthesizers.

Moderators: Kent, __ag

Post Reply
User avatar
cloudleft
Common Wiggler
Posts: 136
Joined: Tue Jul 17, 2018 10:59 am
Location: NYC

805.VS2

Post by cloudleft » Sat Oct 24, 2020 9:50 pm

Hi everyone, can the 805.VS2 be used to crossfade between two stereo sources? I can't quite figure this out from just reading about it.

Thanks for your help!

User avatar
pugix
Super Deluxe Wiggler
Posts: 3577
Joined: Sat Oct 31, 2009 7:23 am
Location: Asheville, NC
Contact:

Re: 805.VS2

Post by pugix » Sat Oct 31, 2020 2:48 pm

Yes it can. Patch one stereo source into inputs 1 and 3, the other into 2 and 4. Patch CV into Left CV in, which normals to Right CV in. Then set both CV attenuators to full (or about the same levels). Set the switches on both cross-faders to Output.

The Master channel is unused, so you have the further option of running the faders through it and getting stereo level control over the output.
Richard
https://www.pugix.com

"Everything in our world is actually always modulated by everything else." - Peter B

Post Reply

Return to “ADDAC System”