Introducing ADDAC502 Ultra Lissajous

Carci · Post by **Carci** » Sun Feb 20, 2011 3:06 pm

Any news ?
A video demo would be much appreciated !

lionelfischer · Post by **lionelfischer** » Tue Mar 15, 2011 9:33 pm

__ag · Post by **__ag** » Wed Mar 16, 2011 9:34 am

I'll try to have one up soon!
time is my worst enemy!

lionelfischer · Post by **lionelfischer** » Sat Apr 02, 2011 7:53 pm

doesnt have to be a video demo

ws9848 · Post by **ws9848** » Sun Apr 03, 2011 12:42 am

I am very curious about this. can't wait for more info

__ag · Post by **__ag** » Sat Apr 09, 2011 1:31 pm

More info will be up soon!
i've completely finished the module, need to start production and add the documentation online.

all the very best
andre

__ag · Post by **__ag** » Tue Jul 19, 2011 6:09 am

there's a new video online:

[video][/video]

all the very best
andre

__ag · Post by **__ag** » Fri Aug 05, 2011 7:28 am

Hello,

i have just finished the first 2 units of the first batch of the ADDAC502 Lissajous Curves, it comes in red!

more info:
This module features 2 XY VC Lissajous Curves

with 4 Independent CV Outputs
Voltage output is centered, like seen in the video voltage goes up and down from a center point, the Voltage output range is selected through a jumper, 2 options:
0 +5V -> centered around 2.5V
0 +10V -> centered around 5V

Controls:
Manual Control for the X1 Maximum Radius
CV/Manual Control for the Y1 Maximum Radius

Manual Control for the X2 Maximum Radius
CV/Manual Control for the Y2 Maximum Radius

CV/Manual Speed Control for Curve 1 & 2

10 Position encoder for defining each channel MODE

MODES
This function makes some maths according to each Lissajous Curve and Axis, mixing each X's and Y's

0 = Y1
1 = Y2
2 = (Y1 + Y2) /2
3 = (X1 + Y1) /2
4 = (X2 + Y2) /2
5 = (X1 + X2) /2
6 = (X1 + Y1 + Y2) /3
7 = (X2 + Y1 + Y2) /3
8 = (X1 + X2 + Y2) /3
9 = (X1 + Y1 + X2 + Y2) /4

it's almost ready to go let me know if anyone interested!
price 250Ã¢â€šÂ¬

There's also the ADDAC502B Expansion with 8 gate outputs, 2 per channel (inverted and non-inverted) generating gate signals for when the curve crosses the center point.

all the very best
andre

mystico · Post by **mystico** » Thu Nov 10, 2011 1:42 am

Is anybody using this module who would like to share some experiences?

mafouka · Post by **mafouka** » Tue Aug 28, 2012 10:11 pm

Does the CV input on Liss 1/2 X/Y work with a clock beep input or does it need a wave from an LFO to work ?

__ag · Post by **__ag** » Wed Aug 29, 2012 7:02 pm

Hello,

The X & Y are for the Maximum value or voltage amplitude of the generated curves/lfo's.
So they don't need any lfo to work, in fact it's a complex lfo generator itself, it uses 4 lfos to generate complex modulation curves, which when paired can be used as Lissajous Curves
The other settings are Speed control for each individual lfo

Meanwhile we've developed a new version so the panel in the thread is outdated, posting a new picture below, this picture also have a couple typos:
the top 2 cv/knobs should state X&Y amplitude, which are now together
the next 4 cv/knobs, as above mentioned, are for the Speed of each independent lfo.

Also the name has changed to Ultra Lissajous

all the very best
andre

DonKartofflo · Post by **DonKartofflo** » Thu Aug 30, 2012 3:41 am

hot damn! you guys always know how to get my gas going!

Post by **Paranormal Patroler** » Tue Sep 04, 2012 1:44 pm

DonKartofflo = ADDAC fanboy

I am one as well.

blinosynth · Post by **blinosynth** » Wed Sep 05, 2012 6:12 am

video please

__ag · Post by **__ag** » Thu Sep 06, 2012 5:04 am

Hello all,

Finnally we're ready to announce the Version 2 of the Lissajous Curves, now titled Ultra Lissajous.

here's all about it:
http://addacsystem.com/product/addac500 ... ous-curves

all the very best
andre

Post by **Paranormal Patroler** » Thu Sep 06, 2012 5:47 am

Andre you've got at least four killer modules out there.

DonKartofflo · Post by **DonKartofflo** » Thu Sep 06, 2012 11:34 am

Paranormal Patroler wrote:DonKartofflo = ADDAC fanboy

I am one as well.

Damn right

gimme that portuguese modular pr0n!

burnn_out! · Post by **burnn_out!** » Thu Sep 06, 2012 11:48 am

Fuckk.. is the expander going to be available as well? Great stuff man

Leisure Cove · Post by **Leisure Cove** » Thu Sep 06, 2012 5:15 pm

Really excited about this module

You could have this, a Marble Physics and a Nchunk Control in a Beauty Case and be pretty much set for a while.

ADDAC is on a roll!

bj_gzp · Post by **bj_gzp** » Thu Sep 06, 2012 5:42 pm

Leisure Cove wrote:Really excited about this module You could have this, a Marble Physics and a Nchunk Control in a Beauty Case and be pretty much set for a while.

ADDAC is on a roll!

You may risk a smoking Mini PSU if you try that

BJ

Leisure Cove · Post by **Leisure Cove** » Thu Sep 06, 2012 5:45 pm

bj_gzp wrote:
Leisure Cove wrote:Really excited about this module You could have this, a Marble Physics and a Nchunk Control in a Beauty Case and be pretty much set for a while.

ADDAC is on a roll!
You may risk a smoking Mini PSU if you try that
BJ

GOOD CALL!

warnton · Post by **warnton** » Wed Sep 19, 2012 11:00 am

about the frequency (=velocity?)
what is the range? does it reach audio? how slow is slowest??

mafouka · Post by **mafouka** » Wed Dec 19, 2012 10:58 pm

how can this module be clocked with an external trigger?

Post by **Paranormal Patroler** » Thu Dec 20, 2012 8:05 am

mafouka wrote:how can this module be clocked with an external trigger?

Hmm, good question. I don't think you can, except if there's something to be done with the CV inputs for Amplitude & Velocity.

dj_bluefalcon · Post by **dj_bluefalcon** » Wed Mar 06, 2013 4:30 am

I am one as well.

I know how you feel.

MUFF WIGGLER

MUFF WIGGLER

Introducing ADDAC502 Ultra Lissajous

Introducing ADDAC502 Ultra Lissajous