Introducing ADDAC206 Switching Sequencer

__ag · Post by **__ag** » Thu Sep 06, 2012 5:11 am

Hello all,

We're very glad to announce our ADDAC206 Switching Sequencer.
This will be a tricky one to explain without a video, but think of it as a switching module controlled by a clock signal.
It works 2 ways 4 ins to 1 out or 1 input to 4 outputs.
Works with both voltage and audio signals.

The initial idea was to allow 4x4 sequencer or bigger to become 16 step sequencers. for example if you have a synthwerks 4x4 sequencer you can feed each row outputs into each of the ADDAC206 inputs, feed the same sequencer clock to the 206 and divide the clock by 4, with this setting your 4x4 sequencer becomes a 16 step sequencer!
You can also set the clock division by any number and you have a sequencer scrambler!

there's more features in it than stated above but maybe the panel is self-explanatory

more info on this soon!
http://addacsystem.com/product/addac200-series/addac206

like always beta users's are welcome, please check details here:
viewtopic.php?t=38161

all the very best
andre

Post by **Paranormal Patroler** » Thu Sep 06, 2012 5:50 am

This look uber-cool. Once again, interested in being beta user (and an ADDAC fanboy!) but need more info.

Edited 'cause I'm stupid.

It's a clever concept. Looks like an intelligent switch. Love the RW/FW functions.

DonKartofflo · Post by **DonKartofflo** » Thu Sep 06, 2012 11:32 am

Really interesting! looking forward to a vid!

Post by **Paranormal Patroler** » Thu Sep 06, 2012 11:34 am

DonKartofflo wrote:Really interesting! looking forward to a vid!

I was waiting for you to show up

suboptimal · Post by **suboptimal** » Thu Sep 06, 2012 12:08 pm

Oooooh I love this.

bj_gzp · Post by **bj_gzp** » Thu Sep 06, 2012 5:35 pm

Perfect buddy for PGM4x4 or Z8000 for sequencing.
I'm more interested to use it to sequence audio

I hope Synthwerks brings the switch version of the PGM4x4 out soon. That with the 207 and a bunch of M11 would make timbre routing maddness for wicked feedback lines in my setup

And the red panels are just sooo sexy.

bj

ignatius · Post by **ignatius** » Thu Sep 06, 2012 5:59 pm

hmmm.. will these show up at AH or only direct order? might be interested in this as a sequencer mangler. looks fun! and love the red!

Post by **Paranormal Patroler** » Sat Sep 08, 2012 9:02 am

ignatius wrote: might be interested in this as a sequencer mangler.

+1

ignatius · Post by **ignatius** » Tue Sep 11, 2012 6:16 pm

DonKartofflo wrote:Really interesting! looking forward to a vid!

yeah.. would love to see a video or just more info. very curious about this one.

Post by **Paranormal Patroler** » Sun Sep 16, 2012 9:07 am

Hey Andre, I want in on the 206 beta-user list. Common'

__ag · Post by **__ag** » Tue Jan 08, 2013 6:15 am

Hello!

Thought of sharing that we've got a few of these in stock from our first small batch.
Get in touch if you've been waiting for them!

all the very best
andre

CF3 · Post by **CF3** » Thu Mar 21, 2013 2:35 am

Love the little app you can download from the site that demos the module

The 206 looks crazy fun.

DonKartofflo · Post by **DonKartofflo** » Thu Mar 21, 2013 8:00 am

Videeoooooooooo

mafouka · Post by **mafouka** » Sat Jun 29, 2013 4:58 pm

This would be a compact substitute for a Mutamix.

Post by **Paranormal Patroler** » Thu Jul 18, 2013 2:11 am

mafouka wrote:This would be a compact substitute for a Mutamix.

Well, it would but it depends on how you've been using the Mutamix. I got the 206 a few days ago and I'm telling you, you need this Switch in your life. It's amazing!

bj_gzp · Post by **bj_gzp** » Thu Jul 18, 2013 3:44 am

Never tried it with audio, only use it behind a PGM4x4 in sequencer mode.
And several M11 to "remote" control both the PGM and 206

Post by **Paranormal Patroler** » Thu Jul 18, 2013 3:48 am

Haven't tried it with audio either. But then again, I do have the switch turned to not-DC although I use CV on the inputs.

The Mutamix is said to click when switching channels if you have an audio input.

ADDAC System · Post by **ADDAC System** » Fri Oct 11, 2013 11:21 am

Hi!

The new ADDAC206 Switching Sequencer Interactive User Guides can be found here:

ADDAC206 Switching Sequencer

All the best,
ADDAC Team

Post by **Kent** » Fri Oct 11, 2013 12:56 pm

This is a really interesting modules. One of the sales that I regret the most was this old unit from Analogue Solutions:

This ADDAC unit appears to be a more than adequate replacement. The cool thing about the ASol unit was that it worked on 'bars'. The ADDAC unit looks as if it can be programmed to do pretty much the same thing. I may have to look into this module further. Once again, I find myself being pulled back into Eurorack via Andre's fine creations.

Post by **Paranormal Patroler** » Fri Oct 11, 2013 1:09 pm

When you decide to go all red dear Kent, we can arrange a European Addacts convention. Our numbers are increasing.

tiny333 · Post by **tiny333** » Fri Oct 11, 2013 1:22 pm

ADDAC System · Post by **ADDAC System** » Fri Oct 11, 2013 2:48 pm

Hello all,

Thanks for the good words everybody!!

I really regret not coming here more often but time's never enough...
Especially because every time i come here i always read these nice posts, we really appreciate the love you share with us, we feel it and hope you feel it from us as well, even if not in words through our activity here!

Still ADDAC wants to be more in touch with all of you and for this reason we created this new account and either me or Ruben we'll be updating and replying to posts more often!
Ruben is my longest time collaborator and long time active muffwiggler addict!

We've also created a skype account that we invite everyone to call in and chat with us, we're so remote that we can feel it in our bones, we'd love to be closer and go all around to synth meets almost as much as we'd love to arrange the addacts meeting here in Lisbon, but who would come?

Nevertheless we recently started some skype tech support video calls and we're also planning to have skype demos for whoever want's to see any of our modules working "live" from a distance!

trying to break the distance and get closer to all of you no matter where in the world you are! Give us a call, ask a question or just say hi and hang up, we'd love to hear from you

(we're gonna make a post on this subject in the next days)
Skype ID: ADDACSystem

btw, kent can you give permissions for this new account to manage our subforum here? Thanks in advance!!

From still warm and sunny Lisbon!
all the very best**
andre

tiny333 · Post by **tiny333** » Fri Oct 11, 2013 3:10 pm

Skype demos sound like a great idea

Xx

thundermouse · Post by **thundermouse** » Sat Oct 19, 2013 3:30 pm

my brain, it's melted.

jnlkrt · Post by **jnlkrt** » Sat Dec 14, 2013 10:43 am

is 1v/step an input or an output? voltage addressing of stages?

MUFF WIGGLER

MUFF WIGGLER

Introducing ADDAC206 Switching Sequencer

Introducing ADDAC206 Switching Sequencer