DAY 7: Ultra .WAV Player

New Interfaces for Analog Synthesizers.

Moderators: Kent, __ag

Post Reply
tiny333
SONIC WARRIOR
Posts: 1742
Joined: Sat Sep 08, 2007 8:00 am

Post by tiny333 » Tue Feb 25, 2014 9:57 am

Well i posted a drum sample u tell me

:tu:

You can use it in so many different ways .. Thats the fun of it i guess

Its great when all the lights are flashing and its just doing its crazy thing


:bananaguitar:

User avatar
Noisefan
Common Wiggler
Posts: 104
Joined: Thu Jan 17, 2013 9:24 pm
Location: Seattle

Post by Noisefan » Fri Mar 07, 2014 2:54 am

22.5khz seems adequate. Fine. Near Mint?

I am very intrigued by this Ultra module but am still looking for some more info.

How do people use/play it. Manually with knobs? CV manipulation? If you've got the expander to hit 8 samples how do you address all 8?

I've watched a few videos of the basic wav player and I see a lot of knob turning with not much response. How much control and variety is possible?

tiny333
SONIC WARRIOR
Posts: 1742
Joined: Sat Sep 08, 2007 8:00 am

Post by tiny333 » Mon Mar 10, 2014 11:38 am

Well its a bit unique

Reading the manual should explain what you can do with it
I have the expansion but tbh tend to use the file access cv
Im sure it will come in handy one day

All in all its a wonderful modual and i need another

8_)

User avatar
balpirol
Learning to Wiggle
Posts: 23
Joined: Thu Jun 27, 2013 4:42 pm
Location: Guhlsdorf

Ultra wav-player

Post by balpirol » Sat Mar 29, 2014 10:15 am

has anyone tested more than 36 files ?
I tested files a.wav,...0.wav until 9.wav
All files 22050 kHz mono
all was okay.
But copying the next file aa.wav (22050 kHz, mono) there was an error.
Deleting all files and renaming aa.wav to a.wav, then copying this new a.wav on card there was no error any longer.
Mysterious. Firmware error ?

digidandy
Veteran Wiggler
Posts: 622
Joined: Fri Mar 29, 2013 4:05 pm
Location: Norway

Post by digidandy » Sat Apr 26, 2014 12:06 am

Can the 111 do "false time stretching", that is cycle through a sample with very short loop times so it sounds like it is being time stretched?

Any sound examples?
My latest release, including vinyl!


User avatar
balpirol
Learning to Wiggle
Posts: 23
Joined: Thu Jun 27, 2013 4:42 pm
Location: Guhlsdorf

Ultra wav-player

Post by balpirol » Sat Apr 26, 2014 12:55 am

after testing and corresponding with ADDAC it is not possible to use more than 36 files (only a-z, 0-9). Filenames like aa does not work.

lyfer
Common Wiggler
Posts: 137
Joined: Thu Apr 25, 2013 9:44 pm

Post by lyfer » Tue Apr 29, 2014 4:07 pm

This thing is unbelievable.

User avatar
ADDAC System
Common Wiggler
Posts: 219
Joined: Sun Oct 06, 2013 12:39 pm
Location: Lisbon, Portugal
Contact:

Post by ADDAC System » Wed Apr 30, 2014 4:09 am

Hi!

You Can check the new ADDAC111 demo videos here:
[video][/video]
[video][/video]

All the best,
ADDAC Team
Questions? Assistance? Hit me up via PM or send us an email!

ADDAC System | [www.addacsystem.com]

lyfer
Common Wiggler
Posts: 137
Joined: Thu Apr 25, 2013 9:44 pm

Post by lyfer » Thu May 01, 2014 2:29 am

ADDAC System wrote:Hi!

You Can check the new ADDAC111 demo videos here:
[video][/video]
[video][/video]

All the best,
ADDAC Team
I had just watched these before I posted. Amazing work.

User avatar
pantalones
Wiggling with Experience
Posts: 278
Joined: Mon Oct 07, 2013 2:46 pm
Location: Palo Alto, CA
Contact:

Post by pantalones » Sun May 18, 2014 7:54 pm

Sorry if i'm missing this in the description, but can this sample from an input or does it only playback off SD?

JNG
Learning to Wiggle
Posts: 3
Joined: Sat Aug 31, 2013 5:34 pm

Post by JNG » Mon May 19, 2014 12:30 am

No sample input, it reads samples off a micro sd card

User avatar
noisefor
Common Wiggler
Posts: 186
Joined: Thu Mar 24, 2011 1:42 am
Location: The Crossroads

Post by noisefor » Sat Feb 21, 2015 1:12 pm

Recently got a 111, and WOW, what a truly amazing and innovative circuit! Well exceeded my expectations once I got it lit up and my head around the functions. Anyone looking for unconventional ways to work with samples in a modular context this is it. Really nothing else like it. The sample rate is a non-issue (imo), and formatting cards is super easy (on a Mac). It's like a dream - The closest thing I had for this type of sampling fun was Max/MSP, and now its all in my modular. Best part is it's purely dependent on what I feed it - so great!

mafouka
Wiggling with Experience
Posts: 457
Joined: Mon Dec 12, 2011 9:26 pm
Location: CA

Post by mafouka » Mon Mar 16, 2015 3:42 pm

Anybody care to share how they keep their micro SD cards organized (physically)? ? ?

Image
They've got these bad boys available, but there's not much room to label what's on the card, plus they only hold 10 cards. Are any of you marking directly on the card using a marker/sticker?

I got crafty and shaped some tape holsters onto graft paper where I could label the content of each card. This method is ok for the studio, but not very sturdy when it comes to transporting for gigging etc.
這一生中有多少人擦肩而過?而朋友是多麼可貴啊

mafouka
Wiggling with Experience
Posts: 457
Joined: Mon Dec 12, 2011 9:26 pm
Location: CA

Post by mafouka » Wed May 13, 2015 8:12 pm

Is anyone else having trouble formatting their SD cards on Win8???
這一生中有多少人擦肩而過?而朋友是多麼可貴啊

mafouka
Wiggling with Experience
Posts: 457
Joined: Mon Dec 12, 2011 9:26 pm
Location: CA

Post by mafouka » Tue May 26, 2015 6:10 pm

OK,

Andre got back to me quickly and informed me Win 8 now leaves hidden carrier files in SD cards now :cry: . . . Although, there is a solution!

The solution is to run Command Prompt from the start menu and then enter in the following prompt:

"RmDir /s /q "e:\System Volume Information"

remember you'll need to change the "e:\ suffix to whatever letter the SD card comes up as, depending on how many drives u got running in yr system. Mine was h:\ for example.

cheers
這一生中有多少人擦肩而過?而朋友是多麼可貴啊

User avatar
Mosiej
Common Wiggler
Posts: 190
Joined: Wed Apr 06, 2016 12:21 pm

Post by Mosiej » Fri Sep 16, 2016 5:48 pm

this is amazing . I want one.... time to sell the octatrack?

User avatar
jc23
Learning to Wiggle
Posts: 27
Joined: Tue Mar 01, 2016 5:28 pm
Location: Scotland

Post by jc23 » Sun Aug 06, 2017 6:09 am

great module, just got one. keenly priced these days too boot!

keep the octatrack!

User avatar
nedrush
Common Wiggler
Posts: 201
Joined: Fri Sep 09, 2016 10:35 am
Location: UK

Post by nedrush » Wed Aug 09, 2017 5:26 am

Hi. I'm considering one of these but the sample rate seems real poor compared to others I've looked at, plus the naming system of files seems faffy.

Im going by what I've read in the manual from 2013. Have there been any updates?

I think what I'm really asking is what's the audio quality like. Cheers.

User avatar
jc23
Learning to Wiggle
Posts: 27
Joined: Tue Mar 01, 2016 5:28 pm
Location: Scotland

Post by jc23 » Thu Aug 10, 2017 9:44 am

as i have to re sample most things to 22050, as well as renaming when saving, the file name system hasn't really bothered me.

audio quality, it works for me.

great module.

User avatar
nedrush
Common Wiggler
Posts: 201
Joined: Fri Sep 09, 2016 10:35 am
Location: UK

Post by nedrush » Thu Aug 17, 2017 5:54 am

I've got one. Have had a quick play but nothing deep yet. Seems I can't play samples backwards?

Otherwise I think I'll have some good use for it. Would love to hear other people patch ideas.

User avatar
ADDAC System
Common Wiggler
Posts: 219
Joined: Sun Oct 06, 2013 12:39 pm
Location: Lisbon, Portugal
Contact:

Post by ADDAC System » Mon Aug 21, 2017 1:55 pm

nedrush wrote:I've got one. Have had a quick play but nothing deep yet. Seems I can't play samples backwards?

Otherwise I think I'll have some good use for it. Would love to hear other people patch ideas.
Glad you're enjoying it! :tu:
Questions? Assistance? Hit me up via PM or send us an email!

ADDAC System | [www.addacsystem.com]

User avatar
nedrush
Common Wiggler
Posts: 201
Joined: Fri Sep 09, 2016 10:35 am
Location: UK

Post by nedrush » Tue Aug 22, 2017 2:45 am

ADDAC System wrote:
nedrush wrote:I've got one. Have had a quick play but nothing deep yet. Seems I can't play samples backwards?

Otherwise I think I'll have some good use for it. Would love to hear other people patch ideas.
Glad you're enjoying it! :tu:
I am, although I had some questions I sent in a tech support email from the website, I don't know if that was received? Or if indeed you are connected to that contact?

User avatar
ADDAC System
Common Wiggler
Posts: 219
Joined: Sun Oct 06, 2013 12:39 pm
Location: Lisbon, Portugal
Contact:

Post by ADDAC System » Tue Aug 22, 2017 1:06 pm

nedrush wrote:
ADDAC System wrote:
nedrush wrote:I've got one. Have had a quick play but nothing deep yet. Seems I can't play samples backwards?

Otherwise I think I'll have some good use for it. Would love to hear other people patch ideas.
Glad you're enjoying it! :tu:
I am, although I had some questions I sent in a tech support email from the website, I don't know if that was received? Or if indeed you are connected to that contact?
I don't handle emails myself, unless you send me a PM here. In any case I will make sure you get a reply! Just in case your questions are simple, have you checked the user's manual for the ADDAC111 ?
Questions? Assistance? Hit me up via PM or send us an email!

ADDAC System | [www.addacsystem.com]

User avatar
nedrush
Common Wiggler
Posts: 201
Joined: Fri Sep 09, 2016 10:35 am
Location: UK

Post by nedrush » Thu Aug 24, 2017 5:08 am

ADDAC System wrote:
nedrush wrote:
ADDAC System wrote:
nedrush wrote:I've got one. Have had a quick play but nothing deep yet. Seems I can't play samples backwards?

Otherwise I think I'll have some good use for it. Would love to hear other people patch ideas.
Glad you're enjoying it! :tu:
I am, although I had some questions I sent in a tech support email from the website, I don't know if that was received? Or if indeed you are connected to that contact?
I don't handle emails myself, unless you send me a PM here. In any case I will make sure you get a reply! Just in case your questions are simple, have you checked the user's manual for the ADDAC111 ?
I've checked the manual. My unit seems a little buggy in places. It may be because it's from a previous owner. Something don't work as described. I wondered if there was a way to reset the firmware or factory settings.

User avatar
ADDAC System
Common Wiggler
Posts: 219
Joined: Sun Oct 06, 2013 12:39 pm
Location: Lisbon, Portugal
Contact:

Post by ADDAC System » Fri Aug 25, 2017 3:40 pm

nedrush wrote:I've checked the manual. My unit seems a little buggy in places. It may be because it's from a previous owner. Something don't work as described. I wondered if there was a way to reset the firmware or factory settings.
Hi nedrush, would you please be so kind as to send another email to addac@addacsystem.com ? They'll help you out.
Questions? Assistance? Hit me up via PM or send us an email!

ADDAC System | [www.addacsystem.com]

Post Reply

Return to “ADDAC System”