Linear slew on Wiard 300 series.

Discussion and support for Wiard Products

Moderators: Kent, carygrace, grantrichter

Super Deluxe Wiggler
Posts: 4002
Joined: Tue Jun 30, 2009 8:58 pm
Location: uk

Post by slow_riot » Sun Feb 22, 2015 4:15 pm

No I prefer smooth tone, it is still very related to the Woggle CV and adds a bit more depth to the patch. Just a fraction, though.

I found syncing using Disturb to be quite difficult to implement, but maybe you can find a way to make it do what you want, or maybe not!

User avatar
If I had two dead rats, I'd give you one
Posts: 140
Joined: Sat Feb 26, 2011 2:50 pm
Location: Wiard Pangalactic Headquarters

Post by carygrace » Sun Feb 22, 2015 6:24 pm

drumsofd00m wrote: BTW Cary, when I try to clock the WB from the old 311's gate buttons, this only works the first time after making the connection, contrary to clocking from e.g. the Borg LFOs. I.e. I get no woggling from the second push onwards. Is there a way to amend this?
If you mean the Step Clock input, That's because the "gate" on those old controllers is just a voltage going through a momentary on-off switch, which won't work properly with the Woggle Bug clock input. Long story short, basically you need a logic output that goes between 0V and 10V (something like the new gate circuit on the 311C, or a square wave will work too).

You can, however, do it with what you have, with a little patching:
Connect the controller gate out to the Envelator gate in (AR mode), then come out of the Envelator into the WB Step Clock input.

User avatar
Super Deluxe Wiggler
Posts: 3456
Joined: Sun Jan 11, 2009 8:24 am
Location: UK

Post by chamomileshark » Mon Feb 23, 2015 1:13 pm

@ Drums. I got it to work. At least I think I have.

Your patch actually is more interesting that straight portmento so thanks for that!
Key Gear: Wiard 300 Series, EMS VCS3, Frac Modular (Blacet, Wiard, Bananalogue & Synthesis Technology).

Pastoral Music: Mark Ellery Griffiths

Experimental & IDM: Mark Dalton Griffiths

Post Reply

Return to “Wiard”