Sequantizer weird issue

Discussion and support for Wiard Products

Moderators: Kent, grantrichter, carygrace

Post Reply
modularfreak
Wiggling with Experience
Posts: 281
Joined: Tue Nov 10, 2009 3:32 pm

Sequantizer weird issue

Post by modularfreak » Sun Feb 09, 2020 7:12 pm

When my Sequantizer is attached to a Hinton power supply the quantizer output doesn´t work - no pitch change at all - while the unquantized output works perfectly.

If I use another power supply - either an original Grant Richter or a Blacet stock - everything is fine. Tried different cables, of course as I found out that sometimes pin 2 or pin 3 of the molex connector is used as ground but that doesn´t seem to matter at all.

All other modules connected to the Hinton seem to work as they should. My guess is that something with the ground isn´t as it should but that´s just a guess from an experienced user with less tech background.

What does the quantized output of the Sequantizer expect that other modules don´t care about?

Help is much appreciated.

Post Reply

Return to “Wiard”