LP1 orientation

Support and discussion for soundmachines products.

Moderators: Kent, soundmachines

Post Reply
User avatar
sir stony
Wiggling with Experience
Posts: 339
Joined: Mon Feb 25, 2019 6:09 pm
Location: Bavaria

LP1 orientation

Post by sir stony » Sun Oct 20, 2019 7:22 am

I just got a LP1 and wondered if it was faulty in a very weird way. In the manual, it says, to raise the voltages, move up and right. But it really is down and right. Or up and left with the jumper setting changed. It's basically 90° off from what the manual says, and also from what I would intuitively expect. However, in some videos it's the same, down and right. So I guess we could just say it's a mistake in the manual?
Or could this be fixed with a new firmware? Also, I found one smd part not being populated right next to the gate jumper, is this ok or is there something missing?

Post Reply

Return to “soundmachines”