ls1 not outputting cv

Support and discussion for soundmachines products.

Moderators: Kent, soundmachines

Post Reply
User avatar
dudeman
Common Wiggler
Posts: 99
Joined: Tue Nov 17, 2015 1:00 pm

ls1 not outputting cv

Post by dudeman » Sun May 14, 2017 4:08 pm

hi guys

just got my hands on an ls-1 and everything seems to working fine. it lights up, hold mode and record mode both work. it even sends gate triggers when i touch it

but... it doesn't appear to be sending any cv

any idea what could be going on here? i'm wondering if it has something to do with the jumpers on the back for the different cv ranges?

the back of my module looks like this.

Picture file

thanks and sorry if i'm missing something here, i'm new to this module and modular in general!

User avatar
erstlaub
Super Deluxe Wiggler
Posts: 2455
Joined: Tue Feb 18, 2014 6:31 pm
Location: Scotland
Contact:

Post by erstlaub » Sun May 14, 2017 4:13 pm

Ive not tried this myself but there should be a jumper that sets whether the voltage is 5v or 10v, perhaps with no jumper set it doesnt send out any v.

Stick a jumper on and check.

User avatar
erstlaub
Super Deluxe Wiggler
Posts: 2455
Joined: Tue Feb 18, 2014 6:31 pm
Location: Scotland
Contact:

Post by erstlaub » Mon May 15, 2017 2:56 am

Aye, just tested this on mine. You definitely need a jumper fitted to either 5 or 10v or nothing comes out.

(the other jumpers are fairly useful too but not as operationally essential so try and rustle up 3 in total)

User avatar
dudeman
Common Wiggler
Posts: 99
Joined: Tue Nov 17, 2015 1:00 pm

Post by dudeman » Mon May 15, 2017 12:26 pm

amazing thanks for this. will get on it today!

j

Post Reply

Return to “soundmachines”