SympleSeq clock source switch mod

Discussion for Hexinverter eurorack modules - email Hex if you need anything urgent!

Moderators: Kent, hexinverter

Post Reply
User avatar
Learning to Wiggle
Posts: 48
Joined: Fri Nov 20, 2015 3:32 am
Location: Nanoose Bay, Canada

SympleSeq clock source switch mod

Post by trimix » Sun Jan 03, 2016 1:31 pm

I just acquired a sympleSeq module from a friend that had modified the kit to fit MOTM. It works fine, but one of the modifications was a DPDT toggle for "Clock Source", switchable from "int" to "ext". But he said he had trouble with the mod, and never connected the switch, preferring to patch with the jacks instead.
Does anybody have info on this mod? Is a DPDT even the right kind of switch? I think the switch would be a handy-dandy thing to use, but I'm not certain if it's simply a matter of connecting leads to the jacks, or something more. In my world, it's usually something more.
Any help?

Post Reply

Return to “Hexinverter Electronique”