SympleSeq needs a buddy...

Discussion for Hexinverter eurorack modules - email Hex if you need anything urgent!

Moderators: Kent, hexinverter

Post Reply
User avatar
trimix
Learning to Wiggle
Posts: 48
Joined: Fri Nov 20, 2015 3:32 am
Location: Nanoose Bay, Canada

SympleSeq needs a buddy...

Post by trimix » Sat Jan 23, 2016 10:07 am

I have a single SympleSeq (Universal) running and it has been great. But it's lonely, and needs a partner....or a slave!
Has anyone come up with a way to "slave" one unit to another? I could run these both independently, but it would be nice to find a way to make a 16 step sequence from the two working together.
I thought since these are fairly simple circuits, there might be a hack out there...

User avatar
Aeidophone
Learning to Wiggle
Posts: 5
Joined: Wed Oct 31, 2012 8:22 pm
Location: Baltimore, MD

Post by Aeidophone » Sun Jan 29, 2017 5:24 pm

I am attempting this same thing: two separate v2.0 boards into one.
Have you had any luck?

All other threads seem to be about the older version or the pre-made double board.

It seems to combine double v1.0 boards you simply cut a clock signal trace on both boards and ran new wires off of the pads. I'm trying to find the equivalent on the newer board, but it's a headache!

Post Reply

Return to “Hexinverter Electronique”