vcNoiz not noisy

Discussion for Hexinverter eurorack modules - email Hex if you need anything urgent!

Moderators: Kent, hexinverter

Post Reply
User avatar
trimix
Learning to Wiggle
Posts: 48
Joined: Fri Nov 20, 2015 3:32 am
Location: Nanoose Bay, Canada

vcNoiz not noisy

Post by trimix » Wed Mar 02, 2016 4:24 pm

Huh?
I've had VcNoiz working for a week or so now, no issues. But last night it was not outputting noise - DC or AC.
With the Rate knob all the way down, I could see I was still getting pulses at random. Clock Out sends a clock.
Just no output from either Noise output. I pulled the module and the jack connections are intact, and again, everything was working days ago.

Ideas? Jumpstarts? :despair: I don't know how to track down problem components.

Update: The VcNoiz I have is the Universal PCB. It has power inputs for both MOTM (+/-15v) and Euro 12v. I had stopped working on the MOTM header. But when I connect to the Euro Header, it now works!
Now what changed...I don't know. I would like to - but I suspect something in there is sensitive to the power input? Whatever. I just assemble the stuff so I can use it... :nana:

Post Reply

Return to “Hexinverter Electronique”