building Mutant BassDrum question about Capacitor

Discussion for Hexinverter eurorack modules - email Hex if you need anything urgent!

Moderators: Kent, hexinverter

Post Reply
User avatar
TechnoPrisoner
Common Wiggler
Posts: 146
Joined: Tue Oct 01, 2013 6:14 am

building Mutant BassDrum question about Capacitor

Post by TechnoPrisoner » Mon May 09, 2016 4:38 am

hey guys !

I've built a couple of modules with success so far but I still consider my self as a beginner, so after checking the BOM on mouser the 47nF capacitor is out of stock so I am ordering a 47nF from Tayda but they don't look the same but is it still good ?

these are the links from both capacitors

http://gr.mouser.com/Search/ProductDeta ... %2f63%2f10

http://www.taydaelectronics.com/47nf-0- ... citor.html


thank you in advance !

User avatar
TechnoPrisoner
Common Wiggler
Posts: 146
Joined: Tue Oct 01, 2013 6:14 am

Post by TechnoPrisoner » Mon May 09, 2016 6:22 am

thinking about building the hihat module too !

but mouser is out of stock on toggle switches

this is from the mouser for the ON OFF ON
http://gr.mouser.com/ProductDetail/Moun ... %2fQ%3d%3d

and this is the replace if any good

http://www.taydaelectronics.com/mini-to ... ff-on.html

and this is the ON ON switch

http://gr.mouser.com/ProductDetail/Moun ... HksQ%3d%3d

and this is the replace again if any good
http://www.taydaelectronics.com/mini-to ... on-on.html

User avatar
ronski
Common Wiggler
Posts: 117
Joined: Thu Mar 06, 2014 7:10 pm
Location: London
Contact:

Re: building Mutant BassDrum question about Capacitor

Post by ronski » Thu May 12, 2016 11:58 am

Yeah that Tayda cap will work fine. Same dimensions as well. Wima is a good quality Cap, not sure about the one Tayda offers. (don't know the brand)
TechnoPrisoner wrote:hey guys !

I've built a couple of modules with success so far but I still consider my self as a beginner, so after checking the BOM on mouser the 47nF capacitor is out of stock so I am ordering a 47nF from Tayda but they don't look the same but is it still good ?

these are the links from both capacitors

http://gr.mouser.com/Search/ProductDeta ... %2f63%2f10

http://www.taydaelectronics.com/47nf-0- ... citor.html


thank you in advance !

User avatar
ronski
Common Wiggler
Posts: 117
Joined: Thu Mar 06, 2014 7:10 pm
Location: London
Contact:

Post by ronski » Thu May 12, 2016 12:16 pm

The legs of those switches won't fit in the PCB, they are to thick. You need switches with pins. I found some at Farnell, is that an option for you?

TechnoPrisoner wrote:thinking about building the hihat module too !

but mouser is out of stock on toggle switches

this is from the mouser for the ON OFF ON
http://gr.mouser.com/ProductDetail/Moun ... %2fQ%3d%3d

and this is the replace if any good

http://www.taydaelectronics.com/mini-to ... ff-on.html

and this is the ON ON switch

http://gr.mouser.com/ProductDetail/Moun ... HksQ%3d%3d

and this is the replace again if any good
http://www.taydaelectronics.com/mini-to ... on-on.html

User avatar
TechnoPrisoner
Common Wiggler
Posts: 146
Joined: Tue Oct 01, 2013 6:14 am

Post by TechnoPrisoner » Sat May 14, 2016 4:27 pm

thanks mate !

I got it all covered.

ronski wrote:The legs of those switches won't fit in the PCB, they are to thick. You need switches with pins. I found some at Farnell, is that an option for you?

TechnoPrisoner wrote:thinking about building the hihat module too !

but mouser is out of stock on toggle switches

this is from the mouser for the ON OFF ON
http://gr.mouser.com/ProductDetail/Moun ... %2fQ%3d%3d

and this is the replace if any good

http://www.taydaelectronics.com/mini-to ... ff-on.html

and this is the ON ON switch

http://gr.mouser.com/ProductDetail/Moun ... HksQ%3d%3d

and this is the replace again if any good
http://www.taydaelectronics.com/mini-to ... on-on.html

Post Reply

Return to “Hexinverter Electronique”