Testing a Bassdrum

Discussion for Hexinverter eurorack modules - email Hex if you need anything urgent!

Moderators: Kent, hexinverter

Post Reply
rthorntn
Learning to Wiggle
Posts: 17
Joined: Tue Nov 06, 2018 12:07 am
Location: Sydney, Australia

Testing a Bassdrum

Post by rthorntn » Fri Apr 05, 2019 1:55 am

Hi All,

I'm very new to modular and built a Bassdrum as one of my first projects.

It seems to work OK but how do I confirm it's within spec?

I can trigger it with my BeatStep Pro and I hear a drum noise from my speakers.

I'm new to all this but say for example I turn all the pots fully clockwise and connect the clean output to my oscilloscope should I see a particular waveform, how should that waveform change as I turn a certain pot?

Has anyone done a recording with where the pots should be set to get a certain sound?

Thanks.

Richard

User avatar
fumblesmcdrum
Learning to Wiggle
Posts: 20
Joined: Thu Mar 07, 2019 11:15 pm
Location: Salt Lake City

Post by fumblesmcdrum » Fri Apr 12, 2019 11:38 am

Hi richard! I just did the same thing and had the same questions. Here's a reddit post I made with links to video:



Are you able to confirm the same behavior?

Post Reply

Return to “Hexinverter Electronique”