what fx are you using with your ciat-lonbarde gear?

home of post-70s electronics

Moderators: Kent, bartlebooth

Post Reply
odditymedium
Veteran Wiggler
Posts: 509
Joined: Thu Mar 30, 2017 8:38 am

what fx are you using with your ciat-lonbarde gear?

Post by odditymedium » Fri Sep 21, 2018 11:49 am

sounds almost sacrilegious since all of c-l is one big fx unit innit?
but what fx are you using, and why

jimmie
Veteran Wiggler
Posts: 540
Joined: Thu Jun 03, 2010 2:27 pm
Location: Japan

Post by jimmie » Sat Sep 22, 2018 1:12 am

Personally I think many CL insts sound best at raw, because I feel they sound kinda more like acoustic insts than electric something. light reverb for atmospheric space isn't bad, tho. but I prefer to play them on amplifier (so not line-mixer-monitor) and real room acoustics.

But it also sounds good with effects, especially coco or sidrax. I put them on bluesky, bugbrand PTdelay, or ms70crd etc. coco with space effects smoothing its roughness sometimes I feel. when sidrax generates only clean triangle tones clean reverb is very nice.

williamjturkel
Common Wiggler
Posts: 229
Joined: Thu Jul 06, 2017 10:50 am
Location: London, Ontario, Canada

Post by williamjturkel » Sat Sep 22, 2018 5:19 am

I have a complete IFM set which I enjoy using with Rings (e.g., run Mocante noises into In jack) and Morphagene (to resample patches).

User avatar
corpusjonsey
Wiggling with Experience
Posts: 456
Joined: Mon Apr 15, 2013 10:46 am
Location: Fort Collins, CO

Post by corpusjonsey » Mon Sep 24, 2018 8:25 am

I am using: H9 (some delay/granular/crystal algo), Big Sky, Gristleizer, Analog/tape delay, Octatrack with good results. I use a Coco on a pedalboard with OT as mixer/main out and also routed back to an input on Coco. Second Coco input is either PB or OP-1. Somewhere in there is the chain of effects.

User avatar
chrisdermo
Ultra Wiggler
Posts: 884
Joined: Sun May 20, 2012 1:52 pm

Post by chrisdermo » Mon Sep 24, 2018 9:40 am

Korg Mini KP2 goes wonderfully well with the Tetrax - stereo minijack I/O, and nice tactile playing of basic granular fx etc.
I also used 2 Zoom MS70cdr's with it, mainly with inputs direct from the red oscillator outs - great for adding chains of stereo tremolos and pitch shifters and reverbs etc.
The Bugbrand Crossover Filter + expander panel is great too, the filters can give a nice bit of 'oomph' to the jagged tetrax waveforms, and sound fantastic pinged by sub-audio rates. Banana i/o means perfect cv integration too - same goes for the spring tanker and pt delay units.
Have also used a other fx pedals with the mains outs to good effect - Boss PN2, Boss PS3, Digitech RV-7, Line 6 M5.
WTB / WTTF: Bugbrand PRC2B, DD3, PRC4, ENV1

Current Bugs frame:
https://www.modulargrid.net/f/racks/view/580413

rmro
Common Wiggler
Posts: 76
Joined: Mon Jan 15, 2018 8:37 am

Post by rmro » Mon Sep 24, 2018 11:14 am

I've been putting both Coco and PB through a Rodec Restyler into an H9. Restyler is great having the Wet/Dry knob and the H9 is the H9!

justscratch
Common Wiggler
Posts: 126
Joined: Wed Jan 08, 2014 10:30 pm
Location: virginia

Post by justscratch » Mon Sep 24, 2018 11:24 am

currently enjoying coco2 with various configurations of oto boum & bastl thyme

User avatar
pugix
Super Deluxe Wiggler
Posts: 3345
Joined: Sat Oct 31, 2009 7:23 am
Location: Asheville, NC
Contact:

Post by pugix » Mon Sep 24, 2018 2:53 pm

Might be heresy, but I've put Tetrazzi through Clouds in Spectral Madness mode for some fun at parties. :)
Richard
http://www.pugix.com

"Everything in our world is actually always modulated by everything else." - Peter B

User avatar
Hainbach
Super Deluxe Wiggler
Posts: 3437
Joined: Thu May 26, 2011 3:52 am
Location: Berlin

Post by Hainbach » Tue Sep 25, 2018 12:05 am

Neunaber Slate for gentle reverb, Bastly Thyme for its own sonic brilliance.

User avatar
papercutnoise
Veteran Wiggler
Posts: 750
Joined: Thu Mar 10, 2011 3:17 pm
Location: Ireland

Post by papercutnoise » Tue Sep 25, 2018 1:31 am

pugix wrote:Might be heresy, but I've put Tetrazzi through Clouds in Spectral Madness mode for some fun at parties. :)
I wanna party with you man!!

Recently I've been running my Sidrax through a Line 6 DL4 and then into my Cocoquantus. It gives me a chance to have 3 loops on the go for even my re layers.
Good Transactions with: Pfurmel, Parallel Worlds (x2), Miditerranean, Ping Panic (x2), Soy Sos, jenamu6, READYdot, Poladark, Synesthesia, audioCTRL, dansna, Glitchmachines, RealDudes, wavecircle, msh

rmro
Common Wiggler
Posts: 76
Joined: Mon Jan 15, 2018 8:37 am

Post by rmro » Tue Sep 25, 2018 4:03 am

Organelle is cool too. I like the Granular Freeze patch, very playable to catch moments and manipulate them, it's a nice contrast in textures too—mushy and raw

User avatar
SPIKE the Percussionist
Wiggling with Experience
Posts: 495
Joined: Sun Nov 11, 2012 4:32 pm

Post by SPIKE the Percussionist » Tue Sep 25, 2018 11:24 am

[video][/video]

Tons of FX with the CL noiz weapons.
The list is in the YouTube description.
:)
++

more noiz!

SPIKE the Percussionist

- http://www.manipulate.net -

ASTROGENIC HALLUCINAUTING
CoRE - Constructs of Ritual Evolution
DOGGEBI
Fiddle Witch and the Demons of Doom
morgue city
Unified Space

Mr. Sound Boy King
Wiggling with Experience
Posts: 271
Joined: Sun May 17, 2009 4:16 pm
Location: Ellensburg, WA

Post by Mr. Sound Boy King » Fri Sep 28, 2018 2:04 pm

I've gotten some completely whacked out tones by running a Tetrax through a Korg Miku Stomp. --> https://immigrantbreastnest.com/track/hyperdevotion-ii

User avatar
pugix
Super Deluxe Wiggler
Posts: 3345
Joined: Sat Oct 31, 2009 7:23 am
Location: Asheville, NC
Contact:

Post by pugix » Fri Sep 28, 2018 4:58 pm

Mr. Sound Boy King wrote:I've gotten some completely whacked out tones by running a Tetrax through a Korg Miku Stomp. --> https://immigrantbreastnest.com/track/hyperdevotion-ii
That Korg Miku Stomp is wacked out!
Richard
http://www.pugix.com

"Everything in our world is actually always modulated by everything else." - Peter B

User avatar
krv
Super Deluxe Wiggler
Posts: 1096
Joined: Sat Jul 11, 2009 10:40 am

Post by krv » Mon Oct 22, 2018 5:23 am

Having fun with two different delay lines (thanks M-Air) with my coco, but wondering if anyone works with koma fx kit, as it looks like a nice addition to a coco/sidrax combo

User avatar
papercutnoise
Veteran Wiggler
Posts: 750
Joined: Thu Mar 10, 2011 3:17 pm
Location: Ireland

Post by papercutnoise » Mon Oct 22, 2018 5:29 am

krv wrote:Having fun with two different delay lines (thanks M-Air) with my coco, but wondering if anyone works with koma fx kit, as it looks like a nice addition to a coco/sidrax combo
I don't use the FX but I use the regular Field Kit with my Coco all the time. Great for sending a submix of electro acoustic elements into a single channel of the Coco. I'd imagine the FX would have a similar use, plus many more!
Good Transactions with: Pfurmel, Parallel Worlds (x2), Miditerranean, Ping Panic (x2), Soy Sos, jenamu6, READYdot, Poladark, Synesthesia, audioCTRL, dansna, Glitchmachines, RealDudes, wavecircle, msh

User avatar
krv
Super Deluxe Wiggler
Posts: 1096
Joined: Sat Jul 11, 2009 10:40 am

Post by krv » Mon Oct 22, 2018 5:40 am

papercutnoise wrote:
krv wrote:Having fun with two different delay lines (thanks M-Air) with my coco, but wondering if anyone works with koma fx kit, as it looks like a nice addition to a coco/sidrax combo
I don't use the FX but I use the regular Field Kit with my Coco all the time. Great for sending a submix of electro acoustic elements into a single channel of the Coco. I'd imagine the FX would have a similar use, plus many more!
That’s a nice point of view.
Reg field kit into coco and coco into fx field kit
An everlasting loop of loops machine

User avatar
noisejockey
Super Deluxe Wiggler
Posts: 1556
Joined: Tue Sep 09, 2014 8:15 pm
Location: SF Bay Area, CA, USA
Contact:

Post by noisejockey » Tue Nov 06, 2018 7:49 pm

At the moment, Strymon El Capistan into Eventide Space on a mixer send (mostly Coco and Tetrax being sent to the aux buss), works well with my current needs, but I could see swapping those clean units out with an Industrialectric Echo Degrader and RM-1N for a more aggressive style. Plan on doing that once I get my current bliss-y yayas out with my current setup.

arnoux
Super Deluxe Wiggler
Posts: 2049
Joined: Sun Oct 02, 2011 9:53 am
Location: Lisbon

Post by arnoux » Fri Nov 09, 2018 6:46 am

Here in Lisbon: CocoQuantus > OTO BIM/BOUM/BAM

Italy: CocoQuantus > TFPro P10 > Mutronics Mutator

With the Coco I really like heavy pumping compression + LP filtering to create a dark atmosphere and slowly bring the noise back.
Mutator is super cool because of the envelope followers + it's stereo, works great with the CocoQuantus, they are great friends.

Ideal: CocoQuantus > TFPro P10 (or OTO BOUM) > Mutronics Mutator > OTO BIM/BAM

Lush.

Bobaji
Learning to Wiggle
Posts: 19
Joined: Sun Jun 11, 2017 5:53 am
Location: Norwich, Norfolk, UK

Post by Bobaji » Mon Jan 21, 2019 11:35 am

El capstan - which I put on a kind of slow delay/loop with the plumbutter and eletroharmonix cathedral reverb - for other CL devices. Plus also just started working on setting up various effects chains and modulations in Ableton for live use as well. But very interested in reading what other people are doing, defiantly want to try out other options myself.

Scories
Ultra Wiggler
Posts: 994
Joined: Wed Feb 01, 2012 10:29 am

Post by Scories » Mon Jan 21, 2019 12:27 pm

When I had a Cocoquantus, I found that it pairs very well with a Serge Resonant Equalizer. The ResEQ can tame the noise and accentuate pleasant frequencies of the CQ.
It can be very useful with high-pitched sounds.

Here's an example (the wavery sounds in the background from the beginning of the track):
https://galeriestratique.bandcamp.com/t ... ini-island

Post Reply

Return to “Ciat-Lonbarde”