Random*Source Serge + C-L?

home of post-70s electronics

Moderators: Kent, bartlebooth

Post Reply
odditymedium
Veteran Wiggler
Posts: 509
Joined: Thu Mar 30, 2017 8:38 am

Random*Source Serge + C-L?

Post by odditymedium » Thu Jul 04, 2019 8:43 am

i wanna try plugging in my friend;s Random*Source Serge to the Plumbutter and the Cocoquantus ... will I blow things up?

I wont be plugging anything into the browns... anything else I should know?

The Grump
Veteran Wiggler
Posts: 535
Joined: Fri Apr 15, 2016 6:17 pm

Post by The Grump » Wed Jul 10, 2019 6:58 am

Make sure that your grounds are connected.

odditymedium
Veteran Wiggler
Posts: 509
Joined: Thu Mar 30, 2017 8:38 am

Post by odditymedium » Wed Jul 10, 2019 8:38 am

so... if the grounds are connected, everything is ok?

also same goes for loudest warning?

User avatar
the bad producer
Super Deluxe Wiggler
Posts: 2561
Joined: Tue Mar 17, 2009 8:43 am
Location: Clapton Pond

Post by the bad producer » Wed Jul 10, 2019 9:03 am

I’ve never used C-L but if it’s okay for *RS* and Serge etc, it’s Ok with mine as same voltages etc

The Grump
Veteran Wiggler
Posts: 535
Joined: Fri Apr 15, 2016 6:17 pm

Post by The Grump » Tue Jul 16, 2019 1:51 am

The voltages are pretty close, so yeah, you should be fine, with connected grounds.

User avatar
southphillysynths
Super Deluxe Wiggler
Posts: 2509
Joined: Tue Jan 29, 2013 11:12 am
Location: Philadelphia PA

Post by southphillysynths » Thu Jul 18, 2019 6:49 am

i've been using a cocobutter with a serge panel, works just fine!

I would just be careful of the browns/oranges of rollz, but even so with connected ground you should be fine.
Dcramer wrote:"Not all who wiggle are lost" :boat:
WHO IS BOZO TEXINO?!?!

Post Reply

Return to “Ciat-Lonbarde”