home of post-70s electronics
Moderators: Kent, bartlebooth
- Wiggling with Experience
- Posts: 376
- Joined: Tue Feb 03, 2009 1:16 pm
- Location: brazil
do you have a pic from inside?
One of my recent CL builds - a ruggedized rendition of a Fourses Tarp that'll hopefully weather the road a little better than some of my earlier stuff that was built into cigar boxes and cutlery trays and whatnot...
- Common Wiggler
- Posts: 67
- Joined: Sat Dec 22, 2012 1:06 pm
- Location: Ithaca, NY
Yes indeedy - sorry for the delay - had to roast a bird for the family. Its nothing too fancy - a standard Tarp broken out to bananas. I built on acrylic instead of cardboard and mounted it to the panel with like 30mm standoffs. The only other thing non-standard is breaking out the pots to the bottom of the middle panel. The outputs connect to bananas with a capacitor between the jack and the output for the usual safety reasons.
- Learning to Wiggle
- Posts: 4
- Joined: Tue Mar 12, 2019 1:27 pm
- Location: cali
wanted to do a rungling based system
lil sidrassi, old mr grassi, phosphate of aluminum crystal simulator
originally there were two ultrasound filters in the box but on one of them both pots caught on fire, so I just took it out for now bc I'm too lazy to troubleshoot rn and pretty inexperienced
signals hooked up to bananas and then to quarter inch to triple banana adapters for more flexible routing, currently sending the signal through a talkbox primarily
- Phantom Powers
- Posts: 744
- Joined: Sun Oct 03, 2010 3:14 am
- Location: Rochester, NY
Extended Double Rollz5. It'll be the "house band" at a local weirdo music venue. If you're ever in Rochester, NY and want to take it for a spin, feel free to get in touch.
You do not have the required permissions to view the files attached to this post.