Midi Out for Ardcore

Discussion and Support for our Atmospheric Modification Devices.

Moderators: Kent, loss1234

Post Reply
dislo
Learning to Wiggle
Posts: 5
Joined: Wed Nov 19, 2014 10:37 pm
Location: berlin germany

Midi Out for Ardcore

Post by dislo » Sat Mar 28, 2015 5:56 am

my plan is to make an expander / midi-out connector for the ardcore.

are there some projects going in this direction already?

is it somehow possible to reach the serial pin (pin1) of the arduino on the ardcore board?

User avatar
eclectics
Wiggling with Experience
Posts: 368
Joined: Sat Oct 05, 2013 10:32 am
Location: Melbourne

Post by eclectics » Sun Mar 29, 2015 7:11 am

You can get by with software serial, using D0 or D1 works fine.

there's a small example at github.com/eclectics/ardcore -- the e18_quneo patch. Im using midi out to control leds on the quneo.

I posted about that here viewtopic.php?t=130015

Haven't yet done anything more with it.

Post Reply

Return to “SNAZZY FX”