Controlling lights

Discussion and Support for our Atmospheric Modification Devices.

Moderators: Kent, loss1234

Post Reply
Scamper
Learning to Wiggle
Posts: 42
Joined: Mon Aug 03, 2015 5:37 pm
Location: Bay Area California

Controlling lights

Post by Scamper » Fri Jun 10, 2016 1:03 pm

Hi All,

VERY new to Ardcore. I have a set of Pixel lights that can use an Arduino based controller to set colors, blinks, patterns and apparently low rez video.

So, the question is: Would it be within the realm possibility to interface the Ardcore with the Pixel light controller? I'd be interesting to have cv create patterns for a set of lights like this.

Link to the lights and software in question

User avatar
eclectics
Wiggling with Experience
Posts: 368
Joined: Sat Oct 05, 2013 10:32 am
Location: Melbourne

Post by eclectics » Mon Jun 27, 2016 7:12 am

Taking a quick look it seems communication with thr lights is via spi, which uses particular pins on the Ardcore which aren't all available.

But you could just get a regular arduino, and use suitably attenuated analog I puts from the modular to control the lights.

Post Reply

Return to “SNAZZY FX”