Maximus VCO C1_B

News & Discussion

Moderators: Kent, fonik

Post Reply
User avatar
dankalmanson
Learning to Wiggle
Posts: 20
Joined: Mon May 06, 2019 4:04 pm
Location: Seattle, WA

Maximus VCO C1_B

Post by dankalmanson » Sun May 17, 2020 1:01 pm

Hi all. I made a major bonehead move and totally took out a piece of metal for TH soldering to one of the legs of the C1_B 22pf. I was wondering if anyone knows where these traces go so I can jump over to them. I really don't want to have to scratch the board and start all over. I need to get a smaller tip for my iron and never solder without some sort of desoldering agent so I will never make a mistake like this again. Any help would be appreciated.

smartwentcrazy
Learning to Wiggle
Posts: 3
Joined: Tue Jun 09, 2020 12:15 pm

Re: Maximus VCO C1_B

Post by smartwentcrazy » Wed Jun 24, 2020 6:47 pm

I am only a novice at this, so I can't provide any real direction, but I do have one of the modules if any pics would help at all?

User avatar
dankalmanson
Learning to Wiggle
Posts: 20
Joined: Mon May 06, 2019 4:04 pm
Location: Seattle, WA

Re: Maximus VCO C1_B

Post by dankalmanson » Thu Jun 25, 2020 1:31 pm

I dont know if a pic would help. I just cant see where the trace on the pcb goes. Ive pretty much given up. I don't think doing a continuity test would work because the solder point is completely gone. It was really a dumb and impatient move on my part. Ya live and ya learn.

Post Reply

Return to “fonitronik”