Current draw?

News & Discussion

Moderators: Kent, fonik

Post Reply
User avatar
Starspawn
Ultra Wiggler
Posts: 779
Joined: Tue Mar 06, 2012 8:12 pm
Location: Norway

Current draw?

Post by Starspawn » Fri Oct 10, 2014 4:08 am

I was wondering what the approximate current draw was for:
TH LFO controller
VC Pan
Attenuverting Mixer
Clock Divider
Seq Switch

I seem to be picking up more of your modules for DIY than anything else, but coming to late for runs its mostly rescuing backlog.

Resonator and Pan is still my favourite module of all :)

TimAsprin
Learning to Wiggle
Posts: 6
Joined: Sat Mar 24, 2018 5:26 pm
Location: WALES

Board Resistance

Post by TimAsprin » Mon Mar 26, 2018 12:36 pm

Dear Fonitronic,
any chance of using a different type of PCB, the black ones seem to really fight back when soldering. In comparison the green ones of MFOS positively seem to beg for solder, and make a delightful building experience.
My only complaint, apart from the endless waiting for Thonk to re stock the PCB's.
Thanks Tim Asprin
Attachments
same solder same iron
same solder same iron
IMG_1112.JPG (2.55 MiB) Viewed 78 times

Post Reply

Return to “fonitronik”