Fonitronik Cascade

News & Discussion

Moderators: Kent, fonik

Post Reply
jamos
Common Wiggler
Posts: 159
Joined: Fri Sep 28, 2018 3:23 pm
Location: Eugene Oregon

Fonitronik Cascade

Post by jamos » Thu Dec 06, 2018 4:51 pm

Just got done with this a few weeks ago. My first kit since my PAiA 2700 series back in the 20th century... I was very pleased when it worked first thing. I do have a few comments however:

- There was no keyed header for the power; instead an unshrouded header was included. Fortunately I had already ordered some for possible retrofits on other unkeyed modules, so that caused me no grief.

- The daughterboard wiggles. I intend to use this for a portable case so I am not entirely comfortable with this. I will probably either replace those two connectors with a direct connection, or use tape to strengthen to connection.

Other than that, great little kit; I'm glad I decided to go that route.
Nord Modular G2 & G2X, Emulator X, MPC Live, and a growing Euro system.

User avatar
lohacker
Ultra Wiggler
Posts: 768
Joined: Sat Oct 01, 2011 6:48 am

Post by lohacker » Thu Dec 06, 2018 5:13 pm

Cascade was my first and still most loved utility, for its size in a small case is a godsend, given you have a deep enough spot to install it. As an audio mixer I like how it can lightly overdrive the signal. About the daughterboard I've applied a bit of tape and never had problems with it :tu:

Post Reply

Return to “fonitronik”