yo!
Just got two of these and now I have 16 channel mixer with eqs and aux send for modular (mackie 1604) Boom!
Anyway one question I have is, how rough can i be with the ribbon cables that joins the two boards together? I have unbalanced versions and I'd like em both flush with the right sides of my case (in different rows of course) but I don't want to break the ribbon cables or connectors to get them that close.
At the minute I have a little over a 1hp gap to leave room for the cable.
Thanks.
io ribbon cable
Moderators: Kent, scottwilson
- ipassenger
- Veteran Wiggler
- Posts: 726
- Joined: Fri Jun 10, 2011 3:19 am
Re: io ribbon cable
they'll sit flush with the edge if you "fold" the ribbon cables in. i have had balanced and unbalanced versions of the io and you always have to push in on the center of the ribbon cable to get it to push in.
- ipassenger
- Veteran Wiggler
- Posts: 726
- Joined: Fri Jun 10, 2011 3:19 am
Re: io ribbon cable
Thanks, got it within 1hp but going to leave it there for now. 
