We'll be back!

Discussion, support, and resources for our noise making modules and kits.

Moderators: Kent, scottwilson

Post Reply
User avatar
scottwilson
Wiggling with Experience
Posts: 432
Joined: Mon Sep 16, 2013 12:54 pm

We'll be back!

Post by scottwilson » Fri Jan 16, 2015 4:52 pm

All right! new incentive for getting through all my design/build/delivery work and get some new shit up here for everyone to enjoy!

s

User avatar
myecholalia
Wiggling with Experience
Posts: 379
Joined: Mon Jan 21, 2013 10:26 am
Location: Singapore

Post by myecholalia » Fri Jan 16, 2015 8:16 pm

:tu: looking forward to what you're whipping up next, scott.

User avatar
monads
Super Deluxe Wiggler
Posts: 1956
Joined: Thu Mar 26, 2009 11:05 am
Location: Odyssey Island
Contact:

Post by monads » Sat Jan 17, 2015 12:34 am

I'm watching out for the nw2s::io balanced version!

User avatar
CF3
Super Deluxe Wiggler
Posts: 3017
Joined: Tue Oct 26, 2010 5:40 pm
Location: San Francisco

Post by CF3 » Sun Jan 18, 2015 10:37 am

monads wrote:I'm watching out for the nw2s::io balanced version!
Ditto. :party:

User avatar
scottwilson
Wiggling with Experience
Posts: 432
Joined: Mon Sep 16, 2013 12:54 pm

Post by scottwilson » Mon Jan 19, 2015 6:42 pm

Balanced modules are making progress. My first issue was NAMM - bad timing as I was working with one of the other manufacturers and they were hammered trying to get everything ready.

So to get around that, I found a non-eurorack-specific manufacturer to finish off the work. They are in-progress there now, so even though I'm not quite as far along as I was hoping, I'll be a couple of months sooner by striking out on my own for SMT manufacturing.

I'm ramping up through-hole manufacturing locally as well, investing in some production tools.

Thanks a lot for your support and patience on those!

-s

User avatar
CF3
Super Deluxe Wiggler
Posts: 3017
Joined: Tue Oct 26, 2010 5:40 pm
Location: San Francisco

Post by CF3 » Mon Jan 19, 2015 9:54 pm

scottwilson wrote:Balanced modules are making progress. My first issue was NAMM - bad timing as I was working with one of the other manufacturers and they were hammered trying to get everything ready.

So to get around that, I found a non-eurorack-specific manufacturer to finish off the work. They are in-progress there now, so even though I'm not quite as far along as I was hoping, I'll be a couple of months sooner by striking out on my own for SMT manufacturing.

I'm ramping up through-hole manufacturing locally as well, investing in some production tools.

Thanks a lot for your support and patience on those!

-s
Rather have it right than fast :tu: No worries. :guinness:

User avatar
spacenoodle
Veteran Wiggler
Posts: 716
Joined: Tue Mar 20, 2012 9:00 pm
Location: Madison, WI

Post by spacenoodle » Tue Jan 20, 2015 11:32 pm

Hoping for the safe return of nw2s threads. There was some good reading in here and I recall some valuable info for b owners.

Post Reply

Return to “nw2s”