Roland CR-800

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
torismad
1-Post Wiggler
Posts: 1
Joined: Fri May 22, 2020 10:45 am

Roland CR-800

Post by torismad » Fri May 22, 2020 11:00 am

Hi, I have a Roland CR-800 and I was wondering if the Uni-Pulse midi kit for the CR-78 would work on this machine as well ?

Any help would be greatly appreciated.

Thanks
https://encyclotronic.com/drum-machines ... r-800-r72/

User avatar
tubbutec
Veteran Wiggler
Posts: 603
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Re: Roland CR-800

Post by tubbutec » Sun May 24, 2020 1:34 am

You will definitely be able to trigger sounds. However without schematics it is hard to say from here. A synth tech would definitively be able to find the trigger points and install uniPulse.
Quite likely the CR-800 uses the same sound board as the CR-68. If you can post some pictures of the board inside, I can probably help better.

Post Reply

Return to “Tubbutec”