Juno 66 VCF LFO issues?

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
chuckfalcon
Learning to Wiggle
Posts: 5
Joined: Thu Nov 23, 2017 12:04 am
Location: Bowling Green

Juno 66 VCF LFO issues?

Post by chuckfalcon » Thu Mar 01, 2018 11:20 am

Hi everyone, I have a problem with my Juno 66 and wanted to see if anyone else experienced the same thing.

As soon as I install the resistor and capacitor on the panel board, my "Trigger" button on my bender panel no longer activates the LFO in the VCF. The "trigger" activates the DCO's LFO as it should before and after installation of the resistor and capacitor on the panel board. When I remove the resistor and capacitor, the "trigger" button works as it should.

Is this supposed to happen? What's going on here? Any help and I would be most appreciative.

Thanks,
Chuck

User avatar
tubbutec
Veteran Wiggler
Posts: 663
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Post by tubbutec » Fri Mar 02, 2018 6:40 am

Hi, can you post a picture of the installed resistor and capacitor?

sebastian_kohn
Learning to Wiggle
Posts: 2
Joined: Sat Jan 24, 2015 4:06 pm

LFO Triger

Post by sebastian_kohn » Sat Sep 29, 2018 11:41 am

Same probleme on my Juno-6.
Installed the Kit today.

Is this normal?

User avatar
tubbutec
Veteran Wiggler
Posts: 663
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Post by tubbutec » Mon Oct 01, 2018 9:34 am

No this is of course not normal. Please post a picture of the installed components. Thank you

Post Reply

Return to “Tubbutec”