µTune midi gate and 0 coast

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
User avatar
tubbutec
Veteran Wiggler
Posts: 559
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

µTune midi gate and 0 coast

Post by tubbutec » Thu Nov 08, 2018 3:27 am

ketem13 wrote:sending midi gate from the gate output.

so I got an 0 coast which has a midi input.

I try to send midi gate from the gate out of the utune to the midi in of the 0 coast and then the gate out of the 0 coast to trigger some envelope but nothing is happening.

any helps with the above ?

Thanks
Hi,

midi gate does not output any midi information. It outputs a gate signal when µTune receives a midi note on/note off massage.
If you want to connect midi out from µTune to the 0 coast, you can use the din-midi output with an adapter to 3.5mm jack
Or you use the µTune gate-out to trigger the 0 coast with its gate input

ketem13
Common Wiggler
Posts: 229
Joined: Tue Jan 16, 2018 2:02 pm

Re: µTune midi gate and 0 coast

Post by ketem13 » Thu Nov 08, 2018 4:11 am

tubbutec wrote:
ketem13 wrote:sending midi gate from the gate output.

so I got an 0 coast which has a midi input.

I try to send midi gate from the gate out of the utune to the midi in of the 0 coast and then the gate out of the 0 coast to trigger some envelope but nothing is happening.

any helps with the above ?

Thanks
Hi,

midi gate does not output any midi information. It outputs a gate signal when µTune receives a midi note on/note off massage.
If you want to connect midi out from µTune to the 0 coast, you can use the din-midi output with an adapter to 3.5mm jack
Or you use the µTune gate-out to trigger the 0 coast with its gate input
will it output a gate signal also when receiving signal to the cv input of utune ?

User avatar
tubbutec
Veteran Wiggler
Posts: 559
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Re: µTune midi gate and 0 coast

Post by tubbutec » Thu Nov 08, 2018 1:47 pm

ketem13 wrote:
tubbutec wrote:
ketem13 wrote:sending midi gate from the gate output.

so I got an 0 coast which has a midi input.

I try to send midi gate from the gate out of the utune to the midi in of the 0 coast and then the gate out of the 0 coast to trigger some envelope but nothing is happening.

any helps with the above ?

Thanks
Hi,

midi gate does not output any midi information. It outputs a gate signal when µTune receives a midi note on/note off massage.
If you want to connect midi out from µTune to the 0 coast, you can use the din-midi output with an adapter to 3.5mm jack
Or you use the µTune gate-out to trigger the 0 coast with its gate input
will it output a gate signal also when receiving signal to the cv input of utune ?
In the beta version there is a function called 'auto-trigger' which does that

Post Reply

Return to “Tubbutec”