[µTune] and analogue synths

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
1-Post Wiggler
Posts: 1
Joined: Mon Dec 03, 2018 12:54 pm
Location: Oderzo

µTune compatibility

Post by MarcoP » Mon Dec 03, 2018 1:29 pm

Hi Tubbutec,

I'm thinking about the µTune module. Are SH -101, TB - 303 and Minikorg 700s (both Cv Kenton Modded) capable of receive microtonal scale via µTune?

I read about only certain synths are capable of being sequenced by a microtonal sequencer. I would love to be more into it.

Thanks for your time,


User avatar
Veteran Wiggler
Posts: 612
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin

Post by tubbutec » Wed Dec 05, 2018 4:52 am

Hi Marco,

every synth with a CV/gate input will work with the µTune. This is also true for synths using the V/Hz mode, such as the Minikorg 700s or MS10/MS20

101 and 303 work with µTune in V/oct mode, for the 101 specifically we also offer the SH-1oh1 µTune which adds quite a lot features.

The current µTune hardware version 18 also features improved gate outputs to specifically address compatibility with vintage synthesizers. The gate output voltage can be switched between 5 and 12V and also supports switch trigger outputs. You can also invert the polarity of the gate.

Post Reply

Return to “Tubbutec”