µTune - midi to clock

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
User avatar
wxyz
Common Wiggler
Posts: 187
Joined: Wed Apr 14, 2010 6:34 am

Post by wxyz » Wed Mar 13, 2019 2:02 pm

Trying to set up a standard midi cable from a computer to create Eurorack clock out. How should the configuration look like?

User avatar
tubbutec
Veteran Wiggler
Posts: 634
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Post by tubbutec » Mon Mar 18, 2019 4:44 pm

Hi,

first make sure your DAW does send a midi clock, sometimes this has to be enabled.
Then in the µTune clock routing, route the clock from your midi source (usb or din) to µT
In the µTune channel config configure the gate-out to 'midi clock' and set the divider to your liking.

User avatar
eircom
Common Wiggler
Posts: 96
Joined: Sat Nov 07, 2015 2:07 am
Location: moscow

Re: µTune - midi to clock

Post by eircom » Wed Jul 08, 2020 7:35 pm

Hi. Is that possible to generate midi clock from CV impulses? I wonder if i'd be able to clock my Norns Shield with it — from the modular? Thanks!

User avatar
tubbutec
Veteran Wiggler
Posts: 634
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Re: µTune - midi to clock

Post by tubbutec » Sun Jul 12, 2020 2:30 am

Convertig an analogue clock to a midi clock is tricky and requires a specialized tool.
I can recommend the Audiowerkstatt trigger2midi2trigger:
https://tubbutec.de/product/audiowerkst ... i2trigger/

Post Reply

Return to “Tubbutec”