Brown wire unconnected on ModyPoly?

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
User avatar
Wiggling with Experience
Posts: 356
Joined: Fri Jun 25, 2010 7:27 pm
Location: Portsmouth, NH

Brown wire unconnected on ModyPoly?

Post by atari5200 » Sun Nov 03, 2019 9:07 am

I just received the ModyPoly upgrade kit for my Mono/Poly- very excited to get it going, but I was curious about the installation instructions regarding MIDI control for the pitch bend. The description in the installation manual just talks about the red wire and additional components, the remaining Brown wire isn't mentioned, but looking at the picture there seems to be another wire connected to J5- is the Brown wire unconnected or is that where I connect it (looks black in the photos so I assume it's a stock part of the M/P, but I wanted to check before I start work on the synth)

User avatar
Veteran Wiggler
Posts: 702
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin

Post by tubbutec » Tue Nov 05, 2019 3:49 am

The brown wire is not used. No need to connect it.

Post Reply

Return to “Tubbutec”