Polychord confusion

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
sgariplerden
Learning to Wiggle
Posts: 5
Joined: Sun May 05, 2019 1:39 pm
Location: Switzerland

Polysix : Poly Chord function

Post by sgariplerden » Wed Nov 13, 2019 9:12 am

Hello,

I am little bit confused with the polychord function. To sum up the steps :

1. Activate the functionality with Poly + Chord Memory
2. For record, I play a chord and press on Poly + Chord Memory (red blink)
3. I select a key / I click on it and it is recorded

so the questions are :

a. does it work with any of the key on the keyboard ? it seems that it is not the case.
b. when working, if I have a C major chord on a single key, I can't play it simultaneously with for example a C3 note (so 4 keys played together)
c. can I erase a stored chord from a specific key ?

thank you for your help,

Samuel

User avatar
tubbutec
Veteran Wiggler
Posts: 607
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Post by tubbutec » Thu Nov 14, 2019 7:53 am

1. yes
2. yes
3. yes

a) it works with any keyboard key
b) No you can only play one chord at a time
c) You can overwrite any chord

sgariplerden
Learning to Wiggle
Posts: 5
Joined: Sun May 05, 2019 1:39 pm
Location: Switzerland

Post by sgariplerden » Sat Nov 16, 2019 3:37 pm

Hello,

Thank you but it is like I would lose some voices in the recording process. From poly to kindof monophonic. I am sure that I have done something wrong :)

Many thanks for your help. Link below.

https://www.youtube.com/watch?v=4LDFafg ... e=youtu.be

User avatar
tubbutec
Veteran Wiggler
Posts: 607
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Post by tubbutec » Wed Nov 20, 2019 4:40 am

Hi,

WHILE playing a chord, you press POLY+CHORD. Then the led will blink and you can define the location to save the chord into.

Post Reply

Return to “Tubbutec”