What is CV2 and CV3 in the ModyPoly Manual appendix?

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
mmryspace
Learning to Wiggle
Posts: 3
Joined: Thu Sep 07, 2017 11:21 am

What is CV2 and CV3 in the ModyPoly Manual appendix?

Post by mmryspace » Sun Jul 12, 2020 1:56 pm

I have the Mody/Poly installed in a Poly-61 and wondering what CV2 and CV3 are in reference to on the MIDI controller chart?

Is it related to the filter control modification outlined in the installation manual?
https://tubbutec.de/files/ModyPoly-Inst ... Poly61.pdf:
1.6 Solder the CV cables
The red and brown wires are aditional CV outputs. There will be a manual update shortly on how you can use these.

User avatar
tubbutec
Veteran Wiggler
Posts: 634
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Re: What is CV2 and CV3 in the ModyPoly Manual appendix?

Post by tubbutec » Mon Jul 13, 2020 5:14 am

CV2 will control the CV-out of the red wire, normally used for pitch bend.
CV3 will control the brown wire output.
These are normally not used

mmryspace
Learning to Wiggle
Posts: 3
Joined: Thu Sep 07, 2017 11:21 am

Re: What is CV2 and CV3 in the ModyPoly Manual appendix?

Post by mmryspace » Mon Jul 13, 2020 7:24 am

Ok, thank you so much for clarifying. Is there a manual update or instructions on how to use / implement them?


Post Reply

Return to “Tubbutec”