Is it hard to change a panel?

A Portland based collective focused on creating high quality artistic & functional panels for modular synths.

Moderators: Kent, phidelity

Post Reply
User avatar
Godphaser
Common Wiggler
Posts: 218
Joined: Thu Dec 21, 2017 12:13 pm

Is it hard to change a panel?

Post by Godphaser » Sun Dec 31, 2017 1:16 pm

Hi all,

New to this and interested in Magpie panels.

Is it hard to change a panel?

What are the steps and needed tools?

Thanks!

emmettthenry
Learning to Wiggle
Posts: 4
Joined: Thu Jun 28, 2018 6:58 am
Location: Pennsylvania

Post by emmettthenry » Mon Jul 09, 2018 8:12 am

It's generally very easy, just repetitive when you have a lot of ins/outs to unscrew and reattach. Most faceplates are attached only by the nuts around the jacks, although some screws anchoring the boards from the back. I usually only need a pair of needle nose pliers. Wrapping the ends in electrical tape will help prevent scratches on your faceplates.

User avatar
Godphaser
Common Wiggler
Posts: 218
Joined: Thu Dec 21, 2017 12:13 pm

Post by Godphaser » Mon Jul 09, 2018 4:42 pm

Thanks! :tu:

Post Reply

Return to “Magpie Modular ”