Page 1 of 1

[COMING] euro friendly MFOS Ultimate

Posted: Tue Jan 09, 2018 11:40 am
by synthcube
Designed to be a 60hp standalone box or integrated in a rack, this adaptation of the MFOS Ultimate makes it more euro-friendly. It will be offered as a pcb (roll your own panel graphics), pcb+panel, full
kit,assembled module, and assembled box. PCB is planned to be DIY-friendly SMT, pcb-mounted jacks, pots, switches and LED

Beautiful panel mockup by Grayscale (as ususal) and of course feedback is welcome.

Those who commented on FB will recognize this as a V2 which is based on some of the feedback there and is more true to the original Ultimate flow...
The main difference here is that the final output is the VCA out, not the Mix out as before (which would have been post-VCA on the earlier mockup). Also removed the EXT OUT from the mixer section, replacing it with Noise (now you have an attenuated noise output). That led to some improvements in the S&H section, such as adding an external trigger input so you can override the internal LFO that drives the S&H.

We have traded some CV control and I/O on this panel in order to stay true(er) to the original design, but in combination with the eurorack MFOS modular projects and of course any other eurorack modules, we hope it will find a place!


Posted: Sat Sep 29, 2018 9:20 pm
by southphillysynths
Any news on this?

Posted: Sun Oct 28, 2018 8:23 pm
by secrethero303
southphillysynths wrote:Any news on this?
Seconded. I have a full size kit I’ve been holding off on building in hopes of doing this version instead.

Posted: Fri Jan 25, 2019 11:43 am
by cyrusparty
I would love to see this happen, any update?

Posted: Wed Jun 26, 2019 8:10 am
by proubaud
Yes, i would love to see it too, but it looks like it's a dead project..

Posted: Tue Jul 09, 2019 10:29 am
by shabax
There is a BOM online if you google it. I guess if somehow wants to take back the project to make it happen, it's possible to work it out from there and the original schematics?

Posted: Tue Jul 09, 2019 11:08 am
by dhaillant
I'm not sure it's a dead project... It really takes a lot of time if you want a finished product.
My Euro/SMT SLMS conversion, for instance, is still in development, started couple years ago.

Now, if it's indeed stoped, I would be pleased to continue it.

Posted: Sun Jul 14, 2019 2:12 am
by synthcube
its coming its coming!!! we promise!

and more after that too!

Posted: Sun Jul 28, 2019 4:33 pm
by smithie
Ditto on the wants to know more!

Posted: Fri Oct 25, 2019 9:23 pm
by madtextureenvy
Looking forward to this one, very much.

Re: [COMING] euro friendly MFOS Ultimate

Posted: Wed Mar 25, 2020 11:18 am
by Brgbeat
Is there any update on this ?